Towers and Masts
73 Towers and Masts from Bell Communications, authorized Motorola distributor in Kingston, Jamaica since 1996. Including self-support towers, guyed towers accessories. Brands: SYSCOM TOWERS, ROHN, Trylon.
73 of 73 products
Mounting for an Emergency LED ULTRASTAR Beacon 252-654-XXSC and PULSATOR 211-925-XX with HLU. Mounting
- 11 gap metal mounting plate.- Gray color.- Indoor / outdoor mounting.The color product may change upon the improver technics to achieve a better performance.
VHF Side Mounting Kit for 3 in (76.2 mm) OD Round Members
VHF Side Mounting Kit for 3 in (76.2 mm) OD Round Members.IncludesBrackets | Clamps | Hardware | Sway braceMechanical SpecificationsColor - SilverMaterial Type - Galvanized steel
Simple Universal Mounting for SLOP5 Obstruction Lamps
Simple universal pole mount for SLOP5 obstruction lamps.Characteristics:Steel manufacturing.Hot-dip galvanized protection.Diameter maximum 1-1/4"Compatible with STZ30G, STZ35G, STZ45G Sections.*Features a main neck, clamp and two safety nuts.
SYSCOM 3/4" x 10" Stainless Steel Rod Stake
3/4" x 10" Stainless Steel Rod StakeCharacteristics:Weight: 2.204 lb (1 kg)Galvanized: Hot - DipOutdoor use* For base: SBZ45GProduct color may vary due to technical improvement.Stated weight does not include accessories or shipping carton.
1/4" Base Plate for STZ30G Tower Section, Hot-dip Galvanized
Product meets ISO 9000-2008 standards.Material:• Base: steel 1/4".• 3/4" steel pipe nipple.• Hot-Dip Galvanized.
Arm type "F" for STZ-35G Sections, Hot Dip Galvanized
*Lateral installation of antennas (max. 1.05 m).Weight: 16.42 lbs (7.45 Kg).1/4" Base Plate for STZ35G Tower Section, Hot-Dip Galvanized
Product Manufactured Under Norms ISO 9000Material:Base steel plate of 1/4"3/4" steel nippleGalvanized: Hot-DipWeight: 9.47 lb (4.3 Kg)For STZ35G Section1/4" Triangular Base Plate, 3/4" Nipple, for STZ45G Section Hot-dip Galvanized
Fabricated in compliance with the ISO 9000 Certification.Material:1/4" Triangular Base Plate3/4" Nipple,Hot-dip GalvanizedWeight: 14.11 lb (6.4 kg)For STZ45G Section
Top Section for STZ-45 Tower Sections, Hot-Dip Galvanized
Product Manufactured Under Norms ISO 9000 - Top section.- 1 1/4" industrial tube.- 2 3/8" central tube.- Hot-dip galvanized.All the sections are made in high precision formers therefore your tower will be perfectly straight and vertical, with no need for adjustments. The use of the top section is recommended to protect the tower from water and rain in the interior.
Safety Guide Bracket for Lifeline
Eliminate risks when performing installations in towers.The lifeline system protects the physical integrity of the installer and at the same time delivers security and agility to the installation process.Functional Characteristics:•Recommended guide for tower installation in towers with a superior height to 15 meters.•For example in an 18-meter tower will install a bracket for a lifeline (SHELV) on the inferior and the superior part. The guide will be installed on the middle, 9 meters high.•Built-in rubber covering to absorb guy wire cable movement.Physical Characteristics:•Application: Exterior.•Material: Steel.•Weight: 0.40 Kg. Approx.Recommendations:•Make sure the installation is made by a trained professional.•Predictably check that hardware is properly adjusted.•Program a maintenance plant to eliminate excess dust and debris from the equipment.*Color of the product may vary for technical improvement. Declared weight represents the product without accessories and packing.FOR QUESTIONS OR COMMENTS CONTACT OUR ENGINEERING DEPARTMENT.
49.2 ft (15 m) 5 Concentrical Sections Telescopic Mast (Requires installation Accessories)
Product Manufactured Under ISO 9000 Standards*Assembled with industrial tubular pipe # 20 gap*Screws included*Each section of Mast measures 3 meters.*Attached sections 1,2,3,4, and 5* It is recommended for equipment smaller than 6 Kg. And dish antennas less than 25 cm. diameter.
10 ft Guyed Tower Section, Recommended for Humid Areas, Hot-Dip Galvanized
Product manufactured under standards ISO 9000• Its Lightweight structure makes assembly of a 30 ft tower easier.• Towers receive a 100% dimensional review. This means that each one of our tower sections is pre-assembled to ensure the compatibility of its perforations.• Features a hot-dip galvanized treatment.• No need to worry about compatibility. A tower section model purchased with us one year ago will be perfectly compatible with the same model bought today, facilitating integration between sections (consult with an installation expert if you want to integrate pieces of different years).Physical Characteristics:• Maximum load: 396.83 lb (180 Kg).• Maximum Height: 30 ft (9.14 m).• Wind resistance: 125 mph (200 Km / hr).• Material: Industrial pipe 7/8 "(Cal.18) Zigzag Diameter: 5/16".• Face width: 0.984 feet (300 mm).• Weight: 29.76 lb (13.5 kg).• Dimensions (length): 9.842 ft (3 m).• Corrosion protection: Galvanized hot.• Application: Weatherproof (wetlands).• Installation bolts included.• Nipple: 3.937" (100 mm)Recommendations:• Ensure that the installation is performed by a trained professional; consult with a professional when mounting equipment in the tower.• Set up a maintenance plan to review retained tensions and adjust screws.• Do not install solar panels over 19 feet high. Check the compatibility of solar panels and tower mountings.* The declared equipment weight does not include accessories or packaging. *10 ft Guyed Tower Section, Recommended for Humid Areas, Hot Dip Galvanized
Product manufactured under standards ISO 9000• Its light structure allows lifting equipment up to 148 ft (45 m)• The team has a 100% dimensional review. This means that each of our sections is pre-assembled to ensure compatibility• It has hot-dip galvanized. Ensures excellent. Humid environments corrosion protection• No need to worry about compatibility. A model of tower section bought with us a year ago will be fully compatible with the same model purchased today, facilitating the integration of parts (consult an expert installation with pieces of different ages)Recommendations:• Ensure that the installation is performed by a trained professional.• Set up a maintenance plan to review retained tensions and adjust screws.• Do not install solar panels over 19’ 8 1/4” (6 m). Check the compatibility of solar cells and assemblies.Physical Characteristics:• Maximum load: 771.62 lb• Maximum Height: 148 ft (45 m)• Wind resistance: 125 mph• Corrosion protection: hot-dip galvanized.• Material: Industrial pipe 1 1/4 "(Cal.14) Zigzag Diameter: 5/16".• Material: Steel• Application: Weatherproof (wetlands).• Face width: 13.78” (35 cm)• Dimensions: 10 ft height (3 m)• Weight: 47.4 lb• Installation bolts included.*The declared weight is without accessories and equipment without packagingTower Section for Areas with High Winds, Moisture Resistant Medium, Maximum Height 30 ft., Hot Dip Galvanized
Product Manufactured Under ISO 9000 Standards•Its lightweight structure enables your desired product to be raised up to 30 ft high.•The product gets a dimensional revision. This means that each one of our tower sections is pre ensemble to ensure compatibility with its bolt, coupling, nipples, etc.•Our product is hot-dip galvanized to ensure excellent protection in humid regions, coastal regions, or moderate corrosion environments.•You don’t have to worry about compatibility problems. A model of the tower section bought with us a year ago will be perfectly compatible with the same model bought today, facilitating the union of sections (consult with an installation expert for older pieces)Physical Characteristics:•Maximum Weight: 1102 lb (500 Kg)•Maximum Height: 30 ft (9.14 m)•Wind Resistance: 125 mph (200 Km/hr)•Material: Industrial tube 1, 1/4” (Cal. 14). Zigzag Diameter 3/8"•Nipple: 4.72" (12 cm).•Face Width: 17.71" (45 cm)•Weight: 58.42 lbs (26.5 Kg)• Proportions: length 10 ft (3 m)• Anticorrosion Protection: Hot-dip galvanization•Application: Outdoors (humid areas)•Material: Steel• Installation bolts included.Recommendations:• Ensure that the installation is performed by a trained professional, consult with a professional when mounting equipment in the tower.• Set up a maintenance plan for review of tensions retained and adjusting screws.• Don't install solar panels over 19 ft. Check for compatibility between solar panels and mountings.• The tower must be painted in orange-red and white, in 7 stripes of equal height starting and ending in orange-red (SYSCOM does not paint the towers).*The declared weight is only for the product it does not take into consideration accessories or packaging.*FOR ANY QUESTIONS OR COMMENTS YOU MAY HAVE REGARDING OUR PRODUCT PLEASE CONTACT THE ENGINEERING DEPARTMENT.
90 ft Self-Supporting Tower, RSL series.
Vertical Structures Built to Last.The all new ROHN RSL tower is a lightweight self-supporting tower designed for use in:• Telecommunication systems.• Wireless networks.• Video surveillance.• PTP links.• Radio broadcast.• Public or private security, etc.The RSL reaches above the line-if-site obstacles such as tree tops, hilly terrain and buildings.Specifications• Available in heights from 20 up to 100 ft (6 to 30 m).• Hot Dip galvanized tower.• Height: 90 feet (27.43 meters).• U-shaped legs allow for simple lap splice connection.• Available in standard and heavy duty models.• Pre-punched holes for attachment of safety climb systems, mounting kits, etc.• Braces for each section are the same length, while bolt lengths are standard throught the tower.• Assembly diagrams included with the tower.• Top closing angle standard with each tower package.Foundation bases and all accessories are ordered separately including step bolt kits, safety climb systems, climbing harness with slider, grounding kits, lightning rods, top mast, mounting kits, W/G brackets, anti-climb assemblies etc.All 3 tower legs in each section have provision to install step bolts and a safety climb system. Step-bolts should be ordered in arrangements of 10 for each tower section.70 ft Self-Supporting Towers, RSL series (Section 1 to 7).
The ROHN RSL is a light weight self-supporting tower designed for use in broadband, public safety, and security applications. The RSL reaches above line-of-site obstacles such as treetops, hilly terrain, and buildings. The RSL is shipped knocked down to reduce shipping costs and time.FEATURES• Available in heights from 20 up to 100 ft (6 to 30 m)• Hot-dip galvanized tower.• Height: 70 ft (21.34 m)• U-shaped legs allow for simple lap splice connection• Available in standard and heavy models• Pre-punched holes for attachment of safety climbsystems, mounting kits, etc.• Braces for each section are the same length, whilebolt lengths are standard throughout the tower• Tower material is hot-dip galvanized• Assembly drawings provided with tower• Top closing angle standard with each tower packageOptional items are available and may be orderedseparately:• Step Bolts• Safety Climbing System*• Top Post• Anti-Climb Brackets• Multiple Mounting Kits• Grounding kit• Top Plate• Accessory Shelf• Waveguide Brackets• Lightning Rod*Per Rev G requirements, any structure greater than 10’requires a climber safety device.70 ft Self-Supporting Tower (sections 4-10) RSL Series
The ROHN RSL is a light weight self-supporting tower designed for use in broadband, public safety and security applications. The RSL reaches above line-of-site obstacles such as tree tops, hilly terrain and buildings. The RSL is shipped knocked down to reduce shipping cost and time.FEATURES• Available in heights from 20’ up to 100’• U-shaped legs allows for simple lap splice connection• Available in standard and heavy models• Pre-punched holes for attachment of safety climbsystems, mounting kits, etc.• Braces for each section are the same length, whilebolt lengths are standard throughout the tower• Tower material is hot-dip galvanized• Assembly drawings provided with tower• Top closing angle standard with each tower packageOptional items are available and may be orderedseparately:• Step Bolts• Safety Climbing System*• Top Post• Anti-Climb Brackets• Multiple Mounting Kits• Grounding kit• Top Plate• Accessory Shelf• Waveguide Brackets• Lightning Rod*Per Rev G requirements, any structure greater than 10’requires a climber safety device.
Red Beacon in Polycarbonate Finish Replacement Dome with Metallic Base
Plastic blue base with a better finish in comparison with other old versions.Manufactured in Red Polycarbonate, shockproof, temperatures, and direct sun impact.Edison Screw base included.It is recommended to use a standard fluorescent light bulb (110 VAC @ 50-60 Hz.).**Requires HLU for installation in tower type STZ.**Is recommended to install with a switch photocell to turn on automatic at the night.
Mast Bracket for Guy-wire (for Mast with an External Diameter of 1" or 2")
Compatible with 1 ~ 2" diameters.Electrostatic paint.Manufactured in steel.Mounting installed in the mast.60 ft Self-Supporting Tower RSL Series. Sections 5 to 10
World Leader in Design and Manufacture of Towers and Masts.The new line of light self-supporting RSL towers are designed for the following applications:• Telecommunication systems.• Wireless networks.• Video surveillance.• PTP links.• Radio broadcast.• Public or private security, etc.Also to improve communication achieving objectives and waging obstacles such as buildings, uneven ground, and treetops, among others.Specifications• Available in heights from 20 up to 100 ft (6 to 30 m).• Tower material is hot-dip galvanized.• Height: 60 ft ( 18.29 m).• U-shaped legs allow for a simple lap splice connection.• Available in standard and heavy models.• Pre-punched holes for attachment of safety climb systems, mounting kits, etc.• Braces for each section are the same length, while bolt lengths are standard throughout the tower.• Assembly diagrams included with the tower.• Top closing angle standard with each tower package.Foundation bases and all accessories must be ordered separately including step bolt kits, safety climb systems, climbing harness with slider, grounding kits, lightning rods, top plate, topmast, mounting kits, W/G brackets, anti-climb assemblies, etc.All three tower legs in each section have provision to install step bolts and a safety climb system. Step-bolts should be ordered in arrangements of 10 for each tower section20 ft Self-Supporting Tower RSL Series. Sections 9 to 10
​ Vertical Structures Built to LastThe ROHN RSL is a lightweight self-supporting tower designed for use in broadband, public safety, and security applications.• Telecommunication systems.• Wireless networks.• Video surveillance.• PTP links.• Radio broadcast.• Public or private security, etc.The RSL reaches above line-of-site obstacles such as treetops, hilly terrain, and buildings.Features: • Available in heights from 20 up to 100 ft (6 to 30 m).• Hot Dip Galvanized.• Height: 20 feet (6.09 meters).• Includes sections 9 and 10.• U-shaped legs allow for a simple lap splice connection.• Pre-punched holes for attachment of safety climb systems, mounting kits, etc.• Braces for each section are the same length, while bolt lengths are standard throughout the tower.• Assembly diagrams included with the tower.• Top closing angle standard with each tower package.Foundation bases and all accessories must be ordered including step bolt kits, safety climb systems, climbing harness with slider, grounding kits, lightning rods, top plate, topmast, mounting kits, W/G brackets, anti-climb assemblies, etc.All three tower legs in each section have provision to install step bolts and a safety climb system. Step-bolts should be ordered in arrangements of 10 for each tower sectionSection Details30 ft Self-Supporting RSL Series. Sections 8 to 10.
World Leader in Design and Manufacture of Towers and Masts.The new line of light self-supporting RSL towers are designed for the following applications:• Telecommunication systems.• Wireless networks.• Video surveillance.• PTP links.• Radio broadcast.• Public or private security, etc.Also to improve communication achieving objectives and waging obstacles such as buildings, uneven ground, and treetops, among others.Specifications:• Available in heights from 20 up to 100 ft (6 to 30 m).• Hot-Dip Galvanized.• Height: 30 Feet (9.14 meters).• Includes sections 8 to 10.• U-shaped legs allow for a simple lap splice connection.• Available in standard and heavy models.• Pre-punched holes for attachment of safety climb systems, mounting kits, etc.• Braces for each section are the same length, while bolt lengths are standard throughout the tower.• Assembly diagrams included with the tower.• Top closing angle standard with each tower package.Foundation bases and all accessories must be ordered separately including step bolt kits, safety climb systems, climbing harness with slider, grounding kits, lightning rods, top plate, top mast, mounting kits, W/G brackets, anti-climb assemblies etc.All three tower legs in each section have provision to install step bolts and a safety climb system. Step-bolts should be ordered in arrangements of 10 for each tower sectionDetail Section30 ft Self-Supporting Tower RSL Series. Sections 1 to 3
World Leader in Design and Manufacture of Towers and Masts.The new line of light self-supporting RSL towers are designed for the following applications: • Telecommunication systems.• Wireless networks.• Video surveillance.• PTP links.• Radio broadcast. • Public or private security, etc.Also to improve communication achieving objectives and waging obstacles such as buildings, uneven ground, and treetops, among others.Specifications:• Available in heights from 20 up to 100 ft (6 to 30 m). • Tower material is hot-dip galvanized.• Height: 30 ft ( 9.14 m).• U-shaped legs allow for a simple lap splice connection.• Available in standard and heavy models. • Pre-punched holes for attachment of safety climb systems, mounting kits, etc.• Braces for each section are the same length, while bolt lengths are standard throughout the tower.• Assembly diagrams included with the tower. • Top closing angle standard with each tower package.Foundation bases and all accessories must be ordered separately including step bolt kits, safety climb systems, climbing harness with slider, grounding kits, lightning rods, top plate, top mast, mounting kits, W/G brackets, anti-climb assemblies, etc.All three tower legs in each section have provision to install step bolts and a safety climb system. Step-bolts should be ordered in arrangements of 10 for each tower section40 ft Self-Supporting Tower RSL Series. Sections 1 to 4.
World Leader in Design and Manufacture of Towers and Masts.The new line of light self-supporting RSL towers are designed for the following applications:• Telecommunication systems.• Wireless networks.• Video surveillance.• PTP links.• Radio broadcast. • Public or private security, etc.Also to improve communication achieving objectives and waging obstacles such as buildings, uneven ground, and treetops, among others.Specifications:• Available in heights from 20 up to 100 ft (6 to 30 m). • Tower material is hot-dip galvanized.• Height: 40 ft ( 12.19 m).• U-shaped legs allow for a simple lap splice connection.• Available in standard and heavy models. • Pre-punched holes for attachment of safety climb systems, mounting kits, etc.• Braces for each section are the same length, while bolt lengths are standard throughout the tower.• Assembly diagrams included with the tower. • Top closing angle standard with each tower package.Foundation bases and all accessories must be ordered separately including step bolt kits, safety climb systems, climbing harness with slider, grounding kits, lightning rods, top plate, topmast, mounting kits, W/G brackets, anti-climb assemblies, etc.All three tower legs in each section have provision to install step bolts and a safety climb system. Step-bolts should be ordered in arrangements of 10 for each tower section40 ft Self-Supporting Tower RSL Series. Sections 7 to 10.
Vertical Structures Built to LastThe new line of light self-supporting RSL towers are designed for the following applications:• Telecommunication systems.• Wireless networks.• Video surveillance.• PTP links.• Radio broadcast.• Public or private security, etc.Also to improve communication achieving objectives and waging obstacles such as buildings, uneven ground, and treetops, among others.Specifications• Available in heights from 20 up to 100 ft (6 to 30 m).• Tower material is hot-dip galvanized.• Height: 40 ft ( 12.19 m).• U-shaped legs allow for a simple lap splice connection.• Available in standard and heavy models.• Pre-punched holes for attachment of safety climb systems, mounting kits, etc.• Braces for each section are the same length, while bolt lengths are standard throughout the tower.• Assembly diagrams included with the tower.• Top closing angle standard with each tower package.Foundation bases and all accessories must be ordered separately including step bolt kits, safety climb systems, climbing harness with slider, grounding kits, lightning rods, top plate, topmast, mounting kits, W/G brackets, anti-climb assemblies, etc.All three tower legs in each section have provision to install step bolts and a safety climb system. Step-bolts should be ordered in arrangements of 10 for each tower section
50 ft Self-Supporting Tower RSL Series. Sections 5 to 9.
World Leader in Design and Manufacture of Towers and Masts.The new line of light self-supporting RSL towers are designed for the following applications: • Telecommunication systems.• Wireless networks.• Video surveillance.• PTP links.• Radio broadcast. • Public or private security, etc.Also to improve communication achieving objectives and waging obstacles such as buildings, uneven ground and treetops, among others.Specifications:• Available in heights from 20 up to 100 ft (6 to 30 m). • Tower material is hot-dip galvanized.• Height: 50 ft ( 15.24 m).• U-shaped legs allow for a simple lap splice connection.• Available in standard and heavy models. • Pre-punched holes for attachment of safety climb systems, mounting kits, etc.• Braces for each section are the same length, while bolt lengths are standard throughout the tower.• Assembly diagrams included with the tower. • Top closing angle standard with each tower package.Foundation bases and all accessories must be ordered separately including step bolt kits, safety climb systems, climbing harness with slider, grounding kits, lightning rods, top plate, topmast, mounting kits, W/G brackets, anti-climb assemblies, etc.All three tower legs in each section have provision to install step bolts and a safety climb system. Step-bolts should be ordered in arrangements of 10 for each tower section50 ft Self-Supporting Tower RSL Series. Sections 6 to 10.
Vertical Structures Built to LastThe new line of light self-supporting RSL towers are designed for the following applications:• Telecommunication systems.• Wireless networks.• Video surveillance.• PTP links.• Radio broadcast.• Public or private security, etc.Also to improve communication achieving objectives and waging obstacles such as buildings, uneven ground, and treetops, among others.Specifications:• Hot Dip galvanized.• Height: 50 feet ( 15.24 meters).• Weight: 1000 lbs (approx.)• Diseño único en Piernas Tipo "U" para fácil instalación.• Disponible en modelos Estándar y Uso Rudo.• Orificios troquelados para la fijación de sistemas de seguridad de ascenso, kits de Mounting, etc.• Los brazos de apoyo de cada sección son del mismo tamaño, mientras que los pernos son estándar.• Diagramas de Mounting se incluyen con la Tower.• Ángulo de cierre superior estándar con cada paquete de Tower.Basic Installation Accessory (Necessary for installation):• Tower base (RSB10). quote 1 piece• Top plate (RTP56). quote 1 piece• Tower bolts (RSLSTEP). Bolts for tower ascension (quote 5 pieces).Optional accessories:• Mast (RSLTMA). 1 piece per tower.• Lifeline system (TTRSL50). Security system for the installer (1 piece per tower).• Original ROHN grounding system for RSL tower (RGKG). (1 piece per tower).• Original ROHN lightning rod system (LRCL). (1 piece per tower).• Security harness kit (SKIT002). Professional harness for installer safety.• Safety Cable Slider with Carabiner (TTWG500W/SMC). Locks when feeling a descendant load.Foundation bases and all accessories must be ordered separately including step bolt kits, safety climb systems, climbing harness with slider, grounding kits, lightning rods, top plate, topmast, mounting kits, W/G brackets, anti-climb assemblies etc.All three tower legs in each section have provision to install step bolts and a safety climb system. Step-bolts should be ordered in arrangements of 10 for each tower section​70 ft Self-Supporting Tower (Sections 3-9) RSL Series.
The ROHN RSL is a light weight self-supporting tower designed for use in broadband, public safety and security applications. The RSL reaches above line-of-site obstacles such as tree tops, hilly terrain and buildings. The RSL is shipped knocked down to reduce shipping cost and time.FEATURES• Available in heights from 20’ up to 100’• U-shaped legs allows for simple lap splice connection• Available in standard and heavy models• Pre-punched holes for attachment of safety climbsystems, mounting kits, etc.• Braces for each section are the same length, whilebolt lengths are standard throughout the tower• Tower material is hot-dip galvanized• Assembly drawings provided with tower• Top closing angle standard with each tower packageOptional items are available and may be orderedseparately:• Step Bolts• Safety Climbing System*• Top Post• Anti-Climb Brackets• Multiple Mounting Kits• Grounding kit• Top Plate• Accessory Shelf• Waveguide Brackets• Lightning Rod*Per Rev G requirements, any structure greater than 10’requires a climber safety device.
Insulated Top Support Bracket for Telewave F6- 8-10 Collinear Antennas
Insulated Top Support Bracket for Telewave F6- 8-10 Collinear Antennas.
H assembly support to install fiberglass collinear antennas to 38 cm separation.
H Support Assembly to Install Fiberglass Collinear Antennas to 38 cm Separation.Pipe diameters & assembly dimensions:Vertical pipe diameter: 1.6 inches (4.1 cm).Horizontal pipe diam: 1.3 inches (3.3 cm).Vertical Height: 16 inches (40.6 cm).Horizontal Length: 16 inches (40.6 cm).
Self-Supporting Tower 170 feet (52 meters) SSV HEAVY DUTY Series.
ROHN SSV towers have been in service for over 50 years, tubular legs with angled arms at the bottom, and solid at the top.The entire SSV Heavy Duty line is fully hot-dip galvanized inside and out for high corrosion protection.Used for a wide variety of industry preferred applications including broadcasting, PCS, security, sports lighting, and many more.Physical Characteristics:Maximum wind resistance: 145 KM/H (90 MPH).Tower height m: 52m (170ft).Tower model: SS170D90.Tower weight: 5712 lbs.Top section: 3WNBLower section: 11N.Includes hardware and anchors for foundationEffective Projected Area (Ft2)On top of the towerRound: 5.8 Ft2Flat: 3.5 Ft2To 9m (30’) below the top:Round: 8.3 Ft2Flat: 5 Ft2Design Features:Tower designs are in accordance with ANSI / EIA-222-F approval (no ice).Flat dish antenna areas equivalent to EIA RS-222-C should not exceed the areas shown in the tables.The effective projected areas are assumed to be symmetrical loads on the tower.Designs assume one 7/8 line to tip or 2 lines 7/8 to 9m (30 ft) down from the tip, one line for each face.All towers include a top plate with conical supports for 2 3/8 ”(6 cm) and 14” (35.6 cm) free length pipe.Foundation details and assembly diagrams are included with the tower.Custom designs for specific site applications are available upon request.Detail of Sections:The detail in sections:Images of Similar Towers (For reference only):130 ft Self-Supporting Tower SSV HEAVY DUTY Series.
ROHN SSV towers are available with a wide variety of pre-designed accessories including:• Platforms• Antenna Mounts• Tower Climbing Ladders• Lighting Accessories• Mounting Frames• Ice Shields• Safety Climbing DevicesMost ROHN SSV self-supporting tower sections use angle steel cross bracing with lighter upper sections using a Zig-Zag brace pattern. SSV tower sections can be combined with “K” braced SSMW self-supporting tower sections for added height and strength when needed.Time tested strength and design, the ROHN SSV series of self-supporting towers provide an excellent strength to cost ratio proven by years of use. In production for nearly 40 years in our tower design and tower manufacturing facilities, the SSV tower has evolved into a highly efficient and wide-ranging system of custom towers produced from pre-engineered sections. The ROHN SSV tower is the quality standard in the industry for small to midrange self-supporting towers.Physical Characteristics:• Tower height: 130 ft (39 m).• Tower model: SS130D90.• Tower weight: 3829 Lbs.• Superior section: 3WNB• Inferior section: 9NH.• Anchors: 12 bolts 5/8" x 42" (included)• Includes hardware to assemble tower sections.Design Characteristics:• Standard tower designs are in accordance with approved national standard ANSI/TIA-222-G, Structure Class II,Topographic Category 1, 3/4” design ice thickness, seismic coefficient SS Detail sections:Detail in sections:Similar Towers (images used as reference only):
120 ft Self-Supporting Tower SSV Series, Wind Resistance: 90 mph, Heavy Duty
The ROHN SSV tower has been in service for over 50 years. The design utilizes standard parts arranged to create a unique structure. The legs are tubular with angle braces at the bottom and solid legs and braces in the top sections. This tower is used in a variety of applications, from PCS structures and broadband to security, sports lighting and more. The SSV has proven to beone of the industry’s most efficient and preferred structures. All ROHN SSV towers are hot-dip galvanized, inside and out for corrosion protection.Physical Characteristics:- Tower height: 120 ft (36 m)- Wind resistance: 90 mph (145 Km/h)- Tower height: 120 ft (36.6 m).- Tower model: SS120D90.- Tower weigh: 302 lbs.General Notes1. Standard tower designs are in accordance with approved national standard ANSI/TIA-222-G, Structure Class II,Self-Supporting Tower ROHN of 33 meters SSV HEAVY DUTY Series
ROHN SSV towers have been in service for over 50 years, tubular legs with angled arms at the bottom, and solid at the top.The entire SSV Heavy Duty line is fully hot-dip galvanized inside and out for high corrosion protection.Used for a wide variety of industry preferred applications including broadcasting, PCS, security, sports lighting, and many more.Physical characteristics:Tower height: 33.5m (110 ft).Tower model: SS110D90.Tower weight: 2941 Lbs.Top section: 3WNBBottom section: 8N.Includes screws and anchors for the foundationDesign characteristics:The tower designs are in accordance with ANSI / EIA-222-G approval.Flat dish antenna areas equivalent to EIA RS-222-C should not exceed the areas shown in the tables.The effective projected areas are assumed to be symmetrical loads on the tower.Designs assume one 7/8 line to tip or 2 lines 7/8 to 9m (30 ft) down from tip, one line for each face.All towers include top plate with conical supports for 2 3/8 ”(6 cm) and 14” (35.6 cm) free length pipe.Foundation details and assembly diagrams are included with the tower.Custom designs for specific site applications are available upon request.Detail of sections:Detail in sections:Images of Similar Towers (For reference only):
Self-Supporting tower 21 meters. SSV HEAVY DUTY Series.
ROHN SSV towers have been in service for over 50 years, tubular legs with angled arms at the bottom, and solid at the top.The entire SSV Heavy Duty line is fully hot-dip galvanized inside and out for high corrosion protection.Used for a wide variety of industry preferred applications including broadcasting, PCS, security, sports lighting, and many more.Self-supporting towers need specialized transportation for their movement, the freight calculation must be provided by a SYSCOM sales agent.Physical Characteristics:Tower height: 21.33m (70 ft).Tower model: SS110D90.Tower weight: 1620 Lbs.Top section: 3WNBBottom section: 6N.Includes screws and anchors for the foundation.Design characteristics:1. Tower designs are in accordance with ANSI / EIA-222-F approval (no ice).2. Flat dish antenna areas equivalent to EIA RS-222-C should not exceed the areas shown in the tables.3. The effective projected areas are assumed to be symmetrical loads on the tower.4. Designs assume one 7/8 line to tip or 2 lines 7/8 to 9m (30 ft) down from the tip, one line for each face.5. All towers include a top plate with conical supports for 2 3/8 ”(6 cm) and 14” (35.6 cm) free length pipe.6. Foundation details and assembly diagrams are included with the tower.7. Custom designs for specific site applications are available upon request.Detail of sections:Section details:Images of Similar Towers (for reference only):Self-supporting Tower ROHN of 15 meters SSV HEAVY DUTY Series
ROHN SSV towers have been in service for over 50 years, tubular legs with angled arms at the bottom, and solid at the top.The entire SSV Heavy Duty line is fully hot-dip galvanized inside and out for high corrosion protection.Used for a wide variety of industry preferred applications including broadcasting, PCS, security, sports lighting, and many more.Physical characteristics: Tower height: 15.24m (50 ft).Tower model: SS050D90.Tower weight: 1198 Lbs.Top section: 3WNBBottom section: 5N.Includes screws and anchors for the foundationDesign characteristics:The tower designs are in accordance with ANSI / EIA-222-G approval.Flat dish antenna areas equivalent to EIA RS-222-C should not exceed the areas shown in the tables.The effective projected areas are assumed to be symmetrical loads on the tower.Designs assume one 7/8 line to tip or 2 lines 7/8 to 9m (30 ft) down from tip, one line for each face.All towers include top plate with conical supports for 2 3/8 ”(6 cm) and 14” (35.6 cm) free length pipe.Foundation details and assembly diagrams are included with the tower.Custom designs for specific site applications are available upon request.Detail of sections: Detail in sections: Images of installed towers:
Double Side Arm for Guyed Tower, Compatible with STZ30G, STZ35G & STZ45G
Double Side Arm for Guyed Tower, Compatible with STZ30G, STZ35G & STZ45GCharacteristic:Tube height: 1 meter.Diameter: 2" Gauge 30.The separation between tubes 60 cm.Hot-dip galvanized steel.*Ideal for dish antenna
Kit 64 ft Light Self-supporting TBX Tower, 8 Pre-assembled Sections
The light tower line BX autosupported are designed for use in:• Telecommunication systems.• Wireless networks.• Videosurveillance.• PTP links.• Broadcasting.• Public security or private, etc.Improve communication to reach objectives, ridding obstacles like buildings, slopes and treetops, etc...Features• Material: Pre-galvanized steel.• Height: 63.97 ft (19.5 m).• Includes sections 1 to 8.**Base not included, must be ordered separately**Accessories (Not included):BXB7/8. Base for tower installation (Includes three pieces, one for each leg).BXSM. Lateral mounting for antennas.BX Section IllustrationInstallation Image:Easy Storage and Transportation:Installer on Tower.
Mast 2" x 10' with Tripod for Installation, Hot-dip Galvanized
Mast 2" x 10' with Tripod for Installation, Hot-dip Galvanized
Lifeline Kit for Towers STZ30G, STZ35G and STZ45G up to 15 meters High
Eliminate risk when working/installing on towers.The lifeline system protects the physical integrity of the installer while at the same time it gives confidence to the installer.Product Manufactured Under ISO 9000 StandardsFeaturesManufactured in hot-dip galvanized steel.Features all the necessary accessories for fixing.The lifeline system is mandatory according to NOM-009-STP-2011.Applies for tower heights of 15 meters* / 49 feet*.*For lower heights it is recommended to cut the excess cable.Equipment included:Quantity Model Description 1 SHELV Pair of hardware for lifeline system,. 1 SGULV Guide for lifeline 2 SCUE38 Necks for 3/8" guy-wire. 6 SNU38 Knot for 3/8" guy-wire.It is recommended to use 17 meters of 3/18" guy-wire (SRET338CAM or SRET-338).An informative video for working in towers.​
Lifeline Kit for Towers STZ30G, STZ35G and STZ45G up to 30 meters High
Eliminate risks when performing tower installations.The lifeline system protects the installer's physical integrity while giving him confidence and agility during the equipment installation process.Product manufactured under ISO 9000 normsCharacteristics:Manufactured for steel for hot-dip galvanized.It has all the necessary accessories for fixing.The lifeline system is mandatory according to NOM-009-STP-2011.Applies to towers of heights up to 30 meters / 98 feet*.*For lower heights it is recommended to cut the excess cable.Included equipment:Quantity Model Description 1 SHELV Pair of lifeline hardware. 2 SGULV Guide for lifeline. 2 SCUE38 Thimble for 3/8" guy wire. 6 SNU38 3/8" clamp for cable.It is recommended to use 32 meters (98 feet) of 3/18" guy-wire (SRET338CAM or SRET-338).Informative video when working at heights.​
Lifeline kit for Towers STZ35G and STZ45G up to 45 meters High
Eliminate risks when performing tower installations.The lifeline system protects the installer's physical integrity while giving him confidence and agility during the equipment installation process. Product manufactured under ISO 9000 standardsCharacteristics:Manufactured for steel for hot-dip galvanized.It has all the necessary accessories for fixing.The lifeline system is mandatory according to NOM-009-STP-2011.Applies to towers of heights up to 45 meters / 148 feet*.*For any height lower than 45 meters we recommend cutting the excess cable.Equipment included:Quantity Model Description 1 SHELV Pair of lifeline hardware. 2 SGULV Guide for lifeline. 2 SCUE38 Thimble for 3/8" guy wire. 6 SNU38 3/8" clamp for cable.It is recommended to use 47 meters (154 feet) of 3/8" guy-wire (SRET338CAM or SRET-338).Informative video when working at heights.​
Lifeline Kit for Towers STZ45G up to 60 meters High
Eliminate risks when performing tower installations.The lifeline system protects the installer's physical integrity while giving him confidence and agility during the equipment installation process.Product manufactured under ISO 9000 standardsFeaturesManufactured with hot-dip galvanized steel.Compatible with sections model STZ45 and STZ45G.Includes all the necessary accessories for fixing.The lifeline system is mandatory according to NOM-009-STP-2011.Applies to towers of up to 60 meters / 197 feet*.*For lower heights it is recommended to cut the excess cable.Included equipment:Quantity Model Description 1 SHELV Pair of lifeline hardware. 3 SGULV Guide for lifeline. 2 SCUE38 Thimble for 3/8" guy-wire. 6 SNU38 3/8" clamp for cable.We recommend using 62 meters (203 feet) of 3/18" guy-wire (SRET338CAM or SRET-338).Informative video when working at heights.​
Strobe Light Red Color with Mounting
Characteristics:-For indoor applications.-Long life span.-Low current consumption.Available in red, yellow, blue and light colors.-Includes Mounting flange or flange, 68 mm in diameter x 5 cm high.Technical specifications-Operation voltage: 12Vdc-Current consumption: 120mA-Flashes per minute: 90
Equalizing Plates with Screws and Spacers, for 3 Guyed. Hot-dip Galvanized (7.87 x 7.87 x 11.81 in)
Equalizing Plates with Screws and Spacers3 Guyed. Hot-dip Galvanized7.87 x 7.87 x 11.81 in (20 x 20 x 30 cm)
Red LED Obstruction Lamp with Solar Panel (Fixed or Strobe Light) Does Not Include Mounting
The photocell can switch ON/OFF the light on rainy days or at night automatically.Standardization of optical design, high photoelectric conversion efficiency.Adopts high efficient solar chip, the photoelectric conversion efficiency is over 19%.The integration of the waterproof design, it can work in soaking in seawater, high protection grade IP68.Adopts special customized LED chips, transfer efficiency, and the service life is higher than normal LED.Circuit adopts advanced charging and discharging management system, prolong battery’s life effectively.The lamp extends state switch, it can adjust steady or flashing light working mode base on a requirement.Provide the ability for lightning protection, light fastness, resist snow, and rain.Inner adopts a solar phosphoric acid iron battery whose service life can above 3 years，reduce the cost of maintenance and difficulty.The base adopts marine-grade dedicated plastic material, it can apply to seaways and chemical plants that have a hostile and strong corrosive environment.With bird needle to prevent bird drop.No radio frequency (RF), no electromagnetic interferenceSteady working, low cost.<table border=1 cellpadding=
Trylon - Knocked-down 80 ft (24.3 m) T300 TITAN Self-supporting Tower with Base
The Titan tower has been a favorite in light-duty applications for more than 30 years. With more than 15,000 Titan towers installed in North America, this model has been used for telemetry, satellite TV, wireless LAN, wireless Internet, radiocomunication and amateur applications.The Titan is a versatile, modular, pre-engineered tower that requires a minimal footprint and is available in heights ranging from 16 to 96 feet.TITAN WIND LOADModel: T-300Height: 80'Allowable antenna area in ft2 at 70/85/100mph - Survival - no ice (round)70 mph ------ 25 ft²85 mph ------ 9 ft²100 mph ----- NAAllowable antenna area in ft2 at 70/85/100mph - Survival - 1/2” ice (round)70 mph ------ 3 ft²85 mph ------ NATITAN SPECIFICATIONSSelf-Support (free-standing)“Survival” Tower LineMaximum height at minimum costShips assembled in 8ft sections to minimize installation and assembly timeShips nested to minimize freight costSection height: 8ftTITAN APPLICATIONSIdeal for SCADA/remote monitoringTwo-Way radioEMS, Police, Fire, etc.Companies with personal fleets (trucking companies etc.)Wireless Internet Service Providers (WISP)Surveillance applicationsCamera towersTHE TITAN DIFFERENCEMaximum height, minimum cost Self-Support option
Trylon - Knocked-down 80 ft (24.38 m) S300 SuperTITAN Self-Supporting (includes anchor)
The SuperTitan KD is a modular tower that can be built up to 190 feet tall. This modular system can be configured to create towers, varying heights, and load capacitiesSuperTitan KD design meets ANSI-TIA-222 F & G standardSpecificationsType: Self-supporting.Sections: 9.84 ft (3 m).Height: 80 ft (24.38 m).Model: S-300Design to comply with TIA / EIA standardsApplications:Emergency services (police, firefighters, etc.)Increased tower capacity.SCADA systems.Ideally suited for base stations with larger loading parameters.Base station towers.The SUPERTITAN differenceMaximum height 190ft.New innovative packaging.Drastically reduces freight costs.Reduced shipping times.Common Accesories (Not included).Amount Model Description8 TRY-ST-STEP10 Step - Bolt Kit. For sections 1-12.1 TRY-ST-LV100 Cable Safety Climb Kits (slider not included).1 TRY-STLR Titan Lightning Rod1 TRY-ST-GROUND1 Tower Grounding Kit, sections 1-1224 TRYSTBRKT4H Transmission Line Brackets1 TRYSTANTIC12 Anti - Climb Shield Kits - Super Titan sections 1 - 122 EIGSLSE* Red LED Obstruction Light whit Solar Panel2 HLU3TA Obstructuion Light Base for EIGSLSE* Two on top
Trylon - Knocked-down 20 ft (6.09 m) S100 SuperTITAN Self-Supporting, (Includes Anchor).
The SuperTitan KD is a modular tower that can be built up to 190 feet tall. This modular system can be configured to create towers, varying heights, and load capacitiesSuperTitan KD design meets ANSI-TIA-222 F & G standardSpecifications:Type: self-supporting.Sections: 10 ft (3.048 m).Height: 20 ft ( 6.096 m).Model: S-100Designed to comply with TIA / EIAApplications:Emergency services (police, firefighters, etc.)Increase in tower capacity.SCADA systems.Ideally suited for base stations with larger loading parameters.Base station towers.The SUPERTITAN differenceMaximum height 190ft.New innovative packaging.Drastically reduces freight costs.Reduced shipping times.Common Accesories (Not included).Amount Model Description2 TRY-ST-STEP10 Step - Bolt Kit. For sections 1-12.1 TRY-ST-LV100 Cable Safety Climb Kits (slider not included).1 TRY-STLR Titan Lightning Rod1 TRY-ST-GROUND1 Tower Grounding Kit, sections 1-126 TRYSTBRKT4H Transmission Line Brackets1 TRYSTANTIC12 Anti - Climb Shield Kits - Super Titan sections 1 - 122 EIGSLSE* Red LED Obstruction Light whit Solar Panel2 HLU3TA Obstructuion Light Base for EIGSLSE* Two on top
KNOKED DOWN 30FT S100 C/W 5FT FND KIT (46 ft² @ 90 MPH).
The SuperTitan KD is a modular tower that can be built up to 190 feet tall. This modular system can be configured to create towers, varying heights, and load capacitiesSuperTitan KD design meets ANSI-TIA-222 F & G standardSpecifications:Type: self-supporting.Sections: 10 ft (3.048 m).Height: 30 ft (9.144 m).Model: S-100Designed to comply with TIA / EIAApplications:Emergency services (police, firefighters, etc.)Increase in tower capacity.SCADA systems.Ideally suited for base stations with larger loading parameters.Base station towers.The SUPERTITAN differenceMaximum height 190ft.New innovative packaging.Drastically reduces freight costs.Reduced shipping times.Common Accesories (Not included).Amount Model Description3 TRY-ST-STEP10 Step - Bolt Kit. For sections 1-12.1 TRY-ST-LV100 Cable Safety Climb Kits (slider not included).1 TRY-STLR Titan Lightning Rod1 TRY-ST-GROUND1 Tower Grounding Kit, sections 1-129 TRYSTBRKT4H Transmission Line Brackets1 TRYSTANTIC12 Anti - Climb Shield Kits - Super Titan sections 1 - 122 EIGSLSE* Red LED Obstruction Light whit Solar Panel2 HLU3TA Obstructuion Light Base for EIGSLSE* Two on top
Trylon - Knocked-down 60 ft (18.3 m) S100 SuperTITAN Self-Supporting, Includes Anchor, (14 ft² @ 90 MPH)
The SuperTitan KD is a modular tower that can be built up to 190 feet tall. This modular system can be configured to create towers, varying heights, and load capacities.SuperTitan KD design meets ANSI-TIA-222 F & G standard.SpecificationsType: self-supporting.Sections: 9.84 ft (3 m).Height: 60 ft (18.3 m).Model: S-100Designed to comply with TIA / EIA standard.Applications:Emergency services (police, firefighter, etc.)Increase tower capacity.SCADA systems.Ideally suited for base stations with larger loading parameters.Base station towers.The SUPERTITAN differenceMaximum height 190ft.New innovative packaging.Drastically reduces freight costs.Reduced shipping times.Common Accesories (Not included).Amount Model Description6 TRY-ST-STEP10 Step - Bolt Kit. For sections 1-12.1 TRY-ST-LV100 Cable Safety Climb Kits (slider not included).1 TRY-STLR Titan Lightning Rod1 TRY-ST-GROUND1 Tower Grounding Kit, sections 1-1218 TRYSTBRKT4H Transmission Line Brackets1 TRYSTANTIC12 Anti - Climb Shield Kits - Super Titan sections 1 - 122 EIGSLSE* Red LED Obstruction Light whit Solar Panel2 HLU3TA Obstructuion Light Base for EIGSLSE* Two on top
Trylon - Knocked-down 80 ft (24.4 m) S100 SuperTITAN Self-Supporting (includes anchor)
The SuperTitan KD is a modular tower that can be built up to 190 feet tall. This modular system can be configured to create towers, varying heights, and load capacities.SuperTitan KD design meets ANSI-TIA-222 F & G standard.SpecificationsType: Self-supporting.Sections: 9.84 ft (3m).Height: 80 ft (24.4 m).Model: S-100Designed to comply with the TIA / EIA standardApplications:Emergency services (police, firefighter, etc.)Increase tower capacity.SCADA systems.Ideally suited for base stations with larger loading parameters.Base station towers.The SUPERTITAN differenceMaximum height 190ft.New innovative packaging.Drastically reduces freight costs.Reduced shipping times.Common Accesories (Not included).Amount Model Description8 TRY-ST-STEP10 Step - Bolt Kit. For sections 1-12.1 TRY-ST-LV100 Cable Safety Climb Kits (slider not included).1 TRY-STLR Titan Lightning Rod1 TRY-ST-GROUND1 Tower Grounding Kit, sections 1-1224 TRYSTBRKT4H Transmission Line Brackets1 TRYSTANTIC12 Anti - Climb Shield Kits - Super Titan sections 1 - 122 EIGSLSE* Red LED Obstruction Light whit Solar Panel2 HLU3TA Obstructuion Light Base for EIGSLSE* Two on top
Trylon - Knocked-down 90 ft (27.4 m) S100 SuperTITAN Self-Supporting (includes anchor)
The SuperTitan KD is a modular tower that can be built up to 190 feet tall. This modular system can be configured to create towers, varying heights, and load capacities.SuperTitan KD design meets ANSI-TIA-222 F & G standardSpecificationsType: self-supporting.Sections 9.84 ft (3m).Height: 90 ft (27.4 m).Model: S-100Designed to comply with the TIA / EIA standardApplications:Emergency services (police, firefighter, etc.)Increase tower capacity.SCADA systems.Ideally suited for base stations with larger loading parameters.Base station towers.The SUPERTITAN differenceMaximum height 190ft.New innovative packaging.Drastically reduces freight costs.Reduced shipping times.Common Accesories (Not included).Amount Model Description9 TRY-ST-STEP10 Step - Bolt Kit. For sections 1-12.1 TRY-ST-LV100 Cable Safety Climb Kits (slider not included).1 TRY-STLR Titan Lightning Rod1 TRY-ST-GROUND1 Tower Grounding Kit, sections 1-1227 TRYSTBRKT4H Transmission Line Brackets1 TRYSTANTIC12 Anti - Climb Shield Kits - Super Titan sections 1 - 122 EIGSLSE* Red LED Obstruction Light whit Solar Panel2 HLU3TA Obstructuion Light Base for EIGSLSE* Two on top
Trylon - Knocked-down 110 ft (33.5 m) H210 SuperTITAN Self-Supporting (includes anchor)
The SuperTitan KD is a modular tower that can be built up to 190 feet tall. This modular system can be configured to create towers, varying heights, and load capacities.SuperTitan KD design meets ANSI-TIA-222 F & G standardSpecificationsType: self-supporting.Sections: 9.84 ft (3m).Height: 110 ft (33.5m).Model: H-210Designed to comply with TIA / EIAApplications:Emergency services (police, firefighters, etc.)Increase in tower capacity.SCADA systems.Ideally suited for base stations with larger loading parameters.Base station towers.The SUPERTITAN differenceMaximum height 190ft.New innovative packaging.Drastically reduces freight costs.Reduced shipping times.
Trylon - Knocked-down 120 ft (36.5 m) H110 SuperTITAN Self-Supporting (includes anchor)
The SuperTitan KD is a modular tower that can be built up to 190 feet tall. This modular system can be configured to create towers, varying heights, and load capacities.SuperTitan KD design meets ANSI-TIA-222 F & G standardSpecificationsType: self-supporting.Sections 9.84 ft (3m).Height: 120 ft (36.5 m).Model: H-110Designed to comply with the TIA / EIA standardApplications:Emergency services (police, firefighters, etc.)Increased tower capacity.SCADA systems.Ideally suited for base stations with larger loading parameters.Base station towers.The SUPERTITAN differenceMaximum height 190ft.New innovative packaging.Drastically reduces freight costs.Reduced shipping times.
Trylon - Knocked-down 130 ft (39.6 m) S310 SuperTITAN Self-Supporting (includes anchor)
The SuperTitan KD is a modular tower that can be built up to 190 feet tall. This modular system can be configured to create towers, varying heights, and load capacities.SuperTitan KD design meets ANSI-TIA-222 F & G standard.SpecificationsType: self-supporting.Sections: 9.84 ft (3m).Height: 130 ft (39.6 m).Model: S-310Designed to comply with the TIA / EIA standardApplications:Emergency services (police, firefighter, etc.)Increase tower capacity.SCADA systems.Ideally suited for base stations with larger loading parameters.Base station towers.The SUPERTITAN differenceMaximum height 190ft.New innovative packaging.Drastically reduces freight costs.Reduced shipping times.
Trylon - Knocked-down 180 ft (54.9 m) S310 SuperTITAN Self-Supporting (includes anchor)
The SuperTitan KD is a modular tower that can be built up to 190 feet tall. This modular system can be configured to create towers, varying heights, and load capacitiesSuperTitan KD design meets ANSI-TIA-222 F & G standardSpecificationsType: self-supporting.Sections: 9.84 ft (3m).Height: 180 ft (54.9 m).Model: S-310Designed to comply with the TIA / EIA standardApplications:Emergency services (police, firefighter, etc.)Increase tower capacity.SCADA systems.Ideally suited for base stations with larger loading parameters.Base station towers.The SUPERTITAN differenceMaximum height 190ft.New innovative packaging.Drastically reduces freight costs.Reduced shipping times.
Tower especial Autosoportada Robusta de 18 m. Linea SSV HEAVY DUTY (Sec. 8 - 10)
Tower especial 18 metros
Triangular Base for Mast of 1" to 2" with Oppressors. Galvanized by Hot-dip Galvanized
Ceiling base for cable-stayed masts, installation over concrete. Features:(3) 9/16" fixing holes.(1) 9/16" drain hole.Made of 1/4" thick plate and 2" tube gauge 30.Hot-dip galvanized.It has 3 oppressive screws of 5/16" for easy fixing.Weight: 1.77 kgDimensions: 205 x 106 x 180 mm (width x height x depth).*Recommended for fixing masts from 1" to 2" in a concrete slab.
Flat Anchor 3 Hole for Masts, Hot-dip Galvanized, Used in Fixing Masts, Hot-dip Galvanized
Flat Anchor 3 Hole for Masts, Hot-dip Galvanized, Used in Fixing Masts, Hot-dip GalvanizedCharacteristics:(2) 1/2" holes to fix the flat anchor to the ground.(3) Holes for 7/16" cable or wire securement.Manufactured in a plate that is 1/4" thick.Hot-dip galvanized.*Recommended for mast securing.
Strobe with 35 high brightness leds with the option of 9v battery backup
• Operating life exceeding 50,000 hours (more than 5.7 years).• Simple installation of 2 cables• 9-12 VDC / 12 VAC power supply• High impact resistant case• High impact and heat resistant lens• Weather resistant• Reverse polarity protection.• 5 vertical LED strips (32 LED) increase visibility from several directions• 6 different flash options, plus adjustable flash speed• Backup battery available for lighting applications continues
Strobe with 55 high brightness leds with the option of 9v battery backup
• Operating life exceeding 50,000 hours (more than 5.7 years).• Simple installation of 2 cables• 10-24 VDC / VAC power• High impact and heat resistant lens• Weather resistant• Reverse polarity protection.• 10 vertical LED strips (54 LEDs) increase visibility from several directions• 6 different flash options, plus adjustable flash speed• Backup battery available for lighting applications continues• Programmable 100dB piezo sounder
Galvanized Arm for Lamp 2" Diameter with Clamp for Post up to 3" Diameter
Characteristics:Steel arm for lamp installation.Diameter: 2"Material: Galvanized steel.Compatible with masts of 2" to 3"Features slots for strapping or clamp installation for larger diameter posts (strap and clamps not included).
KIT 56 ft Self-supporting TBX Tower, 7 Pre-assembled Sections
The light self-support BX tower series is designed to be used:• Telecommunication systems.• Wireless networks.• Video surveillance.• Point-to-point links.• Broadcasting.• Public or private security, etc.They improve communication when reaching objectives by clearing obstacles such as buildings, uneven floors, and treetops, among others.Features• Material: Pre-galvanized steel.• Height: 55.7 ft / 17 meters.• Includes sections 1 to 7.**Does not include base, it must be ordered separately**Accessories (Not included):BXB7/8. Base for Tower Installation (Includes Three pieces, one for each leg).BXSM. Side Mount for Antennas.Illustration of BX SectionsFOR ANY QUESTIONS OR COMMENTS, PLEASE CONTACT THE ENGINEERING DEPARTMENT.Images of Installed Equipment:Easy Storage and Movement:Tower Installer.
Top Section for STZ-30G Tower Sections, Hot-Dip Galvanized for Lightning Rod Installation.
Elaborated Product Under Norms ISO 9000All the sections are made in high precision formers therefore your tower will be perfectly straight and vertical, with no need for adjustments. The use of the top section is recommended to protect the tower from water and rain in the interior.Top section components• 7/8" Industrial Tube• 2" Central Tube• Hot-dip galvanized
Top Section for STZ-35 Tower Sections, Hot-Dip Galvanized
Elaborated Product Under Rules ISO 9000All sections are made in makers of high precision, therefore your tower will end perfectly straight and vertical without making any adjustments. It is recommended to use the auction to protect the tower against water and the rain in the interior.- Industrial tube: 1 1/4".- Center tube 2".- Hot-dip galvanized.
KIT Light Self-supporting TBX Pre-assembled Tower, 33 ft height, 4 Sections
Self-supporting TBX tower series is designed to be used in:• Telecommunication systems.• Wireless networks.• Video surveillance.• Point to point links.• Public or private security, etc.Improves communication by reaching objectives clearing obstacles such as buildings, uneven floors, and treetops, etc...Characteristics:• Material: Pre-galvanized steel• Height: 9.8 meters.• Includes sections 1 ~ 4.**Doesn't include base, this must be ordered separately**Accessories (Not included):BXB4. Base for tower installation (includes 3 pieces, one for each leg)BXSM. Lateral mounting for antennas.BX Sections (Illustrative)FOR QUESTIONS OR COMMENTS CONTACT THE ENGINEERING DEPARTMENTInstalled equipment images:Easy performance and movement:Tower installation.
kit SelfSupporting TBX Tower, 40 ft (12.2 m) Height, 5 Sections
Self supporting TBX tower series are designed to be used in:• Telecommunication systems.• Wireless networks.• Video surveillance.• Point to point links.• Public or private security, etc.Improves communication by reaching objectives clearing obstacles such as buildings, uneven floors and treetops, etc...Features• Material: Pre galvanized steel• Height: 40' (12.2 m)• Sections: 1 to 5.**Doesn't include base, this must be ordered separately**Accessories (Not included):BXB5: Base for tower installation (Includes 3 pieces, one for each leg).BXSM: Lateral mounting for antennas.Tower sectionsIllustrative ImageEasy storage and transportationTower installator
Low-intensity Single Aviation Obstruction Light Double
Function & FeaturesGS-LI/D Low-intensity Double Aviation Obstruction light, Base adopts metal stoving varnish,Light source adopt with independent research and development dedicated LED chip ,which have the specific of high light intensity ,low power consumption and long service life; Lampshade adopt with PC material, it can resist corrosion, anti-UV, anti-shock; management circuit with Strong lightning protection and With the surge protection device, which can adopt to extremely bad working environment. This lamp with photoswich, it can turn on when light intensity less than 50LUX, and turn off when above 50Lux.Applicationl Buildingl Airportl High Mast lampl Chimneyl Bridgel High-rise Buildingsl Iron towerl Communication towers
Kit de Base Doble con 2 Lamparas de Obstrucción EI-GSL-SE
KIT DE BASE DOBLE CON 2 LAMPARAS DE OBSTRUCCION EI-GSL-SE
Base Mounting for LED Obstruction Lamp Model EI-LBIB & EI-GSL-SE / GSLID. Compatible with tubes up to 1-1/4 inches.
Base Mounting for LED Obstruction Lamp Model EI-LBIB & EI-GSL-SE / GSLIDMaterial: 16 gauge steel sheet.For strobe mounting EILBIB / GSLID in tower.Finish: beige electrostatic paint.
Knot/Forged Steel Clamp for 3/16" Cable, Hot-dip Galvanized
MAIN FEATURES.-· Tempered body with hot-dip galvanized treatment.Manufactured to withstand high tension levels for prolonged periods of time.MATERIALcarbon steelThread length6" total length clOsed11 5/16" standardsFEDERAL FF-T-791B thread Diameter3/8" DIMENSIONS (width, Length, height)31.60 X 2.00 X 1.00 load limit320 KG
Low-intensity Single Aviation Obstruction Light (Input 110 Vac) / Include HLU2R2
Function & FeaturesAdopts Fresnel lens PC lampshade, emitting angle follow the standard of FAAWith automatically light control function that can change to working mode at rainy day and night.LED light source, its service life can up to 100000hours.Low voltage design, high safety degree for use.FAA Classify: L-810Power Supply range: 75 to 220 VACSupply Frequency: 50HZ～60HZPower Consumption: ≤3WLight Intensity Type B ≥32cdHorizontal Output: 360°Vertical Divergence: 10°Steady lightEmitting Color: RedOverall Size: 5.35 x 5.35 x 8.66" (136 ×136 ×220 mm)IP Protection: IP66Weight: 1kgInclude HLU2R2
No products match your search, but we can still try to source it. Use the button below.
Don't see what you need?
We carry far more than we can list, and we can often source hard-to-find radios, RF gear and parts on request. Tell us what you're after and we'll try to source it and send you a quote.
Message us and we'll try to source it & send you a quote →