BELL COMMUNICATIONS← Back to home

Cellular Coverage 5G, 4G, 3G and Voice

12 Cellular Coverage 5G, 4G, 3G and Voice from Bell Communications, authorized Motorola distributor in Kingston, Jamaica since 1996. Including cell signal boosters, antennas, cables and accessories. Brands: WILSONPRO / WEBOOST, EPCOM, PCTEL.

12 of 12 products

  • Cell Signal Booster Kit DRIVE X | Boosts cellular signal for multiple users in any passenger vehicle-car, truck, van,…

    Cell Signal Booster Kit DRIVE X | Boosts cellular signal for multiple users in any passenger vehicle-car, truck, van,…

    WILSONPRO / WEBOOST · 475-021

    Affordable connectivity to go
    Drive X is our standard multi-user in-vehicle cell signal booster. It’s designed to provide enhanced coverage; reaching cell towers up to 33% farther than the weBoost Drive Sleek.
    Installed in minutes without tools, Drive X stops dropped calls while also improving voice quality, data speeds, and streaming capability.
    Drive X works on all US carrier networks and is compatible with all phones and cellular devices as it simultaneously supports multiple users.
    5G Ready - weBoost boosters will work for the next decade and beyond.
    Features Benefits
    Boosts signal for all U.S. cell carriers
    Extends cellular signal range
    Friendly, U.S.-based customer support
    Reliable cell signal and more consistent data speeds
    All components needed for installation in one package
    Faster data downloads
    FCC Certified
    Up to 2 hours of additional talk time in weak-signal areas
    Model Number: 470121   Frequency Band 12/17 700 MHz   Band 13 700 MHz   Band 5 850 MHz   Band 4 1700/2100 MHz   Band 2 1900 MHz Max Gain 50 dB   Power Req 6V/2.5A   Connectors SMA Female   Dimensions 4.5 x 6.25 x 1.3 in   Weight 0.77 lbs
  • 4G, 3G, 2G and VOICE Cellular Signal Amplifier Kit, with Light Wall Mast. Supports Multiple Operators, Devices and…

    4G, 3G, 2G and VOICE Cellular Signal Amplifier Kit, with Light Wall Mast. Supports Multiple Operators, Devices and…

    EPCOM · EP-TB4G-CMLP

    Cell Signal Booster Kit to Improve 4G LTE, 3G Data and Voice. Special for Home or Office.  Includes Lightweight Wall Mast.
    Repeat and amplify the cellular signal to improve the Voice and 4G LTE and 3G Data of your mobile device.
    Reduce missed and drop calls.
    It covers 1 or 5 rooms, up to 5300 square feet.
    Increase the signal level and extend the battery charge.
    Supports multiple devices simultaneously.
    Very easy and simple to install.
    The kit includes practically what you need to improve or create a cell zone.
    A Double band repeater (850 MHz, 1900 MHz and 1700/2100 MHz)
    An antenna log. For exterior.
    An type dome omnidirectional antenna. For interior.
    A whip type omnidirectional antenna. For interior.
    Two Coaxial cables, 65.62 ft. and 16.4 ft.
    Power supply for the repeater.
    1 Mast 1.5 m.  diameter 1 1/4" cal.14.
    2 Anchor screws
    NOTES:
    Of the two internal antennas that are included, only one of the two is installed.
    Wall anchoring will depend on the type of material it is made of.
    The repeater has a Display (LCD) with which you can observe the intensity of the input signal as well as the output, which will help you obtain the maximum performance of the system.
    Main specifications:
    Booster
    Triple Band: 850 MHz ( Band 5), 1900 MHz (Band 2) and 1700/2100 MHz (Band4)
    Frequency range Down Link: 869-894 MHz, 1930-1990 MHz and 2110-2155 MHz
    Frequency range Up Link: 824-849 MHz, 1850-1905 MHz and 1710-1755 MHz
    Gain: 70 dB + - 3 dB
    Output power: 20 dBm
    Consumption:
    Mast:
    Manufactured with Steel A-36.
    Hot-dip galvanized
  • Wideband Antenna for LTE Applications 698-960/1710-2700 MHz

    Wideband Antenna for LTE Applications 698-960/1710-2700 MHz

    PCTEL · PCTP-4GLTE

    HEAVY-DUTY FLEXIBLE ANTENNAS Elevated feed point
    These heavy-duty mobile antennas feature a rugged, flexible design that provides long-lasting performance and reliability under very extreme environmental conditions. They are particularly suited for vehicular installations exposed to extreme temperatures and high vibration conditions.
    Features
    Maximum installation flexibility – Ground plane independent design
    Rugged – Heavy-duty, flexible radome design absorbs shock impact; UV-stable polyurethane housing withstands severe weather conditions
    High performance – Wideband coverage without added field tuning
    Applications
    Vehicular installations exposed to extreme temperatures and high vibration conditions:
    Construction trucks
    Agriculture tractors
    Mining vehicles
  • weBoost Home Studio Cell Signal Booster Kit, especial for Data 4G LTE, 3G and Voice. Coverage for one room.

    weBoost Home Studio Cell Signal Booster Kit, especial for Data 4G LTE, 3G and Voice. Coverage for one room.

    WILSONPRO / WEBOOST · 530-166

    Boost cell signal where you need it most, at home.
    Home Studio is an excellent value for instantly improving talk, text, and data at home. The multi-user cell signal booster is designed to increase cellular connectivity and signal strength in one large room, like a home office, living room, or studio apartment.*
    *May vary depending on outside signal conditions.
    Features
    Boosts signal for all Mexican and LATAM cell carriers
    Friendly, EPCOM based customer support
    All components needed for installation in one package
    Equipment designed exclusively for México and LATAM
    Benefits
    Improved indoor cellular voice and data signal
    Reliable cell signal and more consistent data speeds
    Faster data downloads
    Up to 2 hours additional talk time in weak-signal areas
    In the Box
    470166
    Home Studio Booster
    311159
    Booster Antenna
    314475
    Outside Directional Antenna
    850027
    Power Supply
    950630
    (2) 30' Coax Cables
    Outside Antenna Mounting Bracket
    971129
    Barrel Connector
    Specs Home StudioModel #: 470166
    Frequency
    Band 12/17 700 MHz
    Band 13 700 MHz
    Band 5 850 MHz
    Band 4 1700/2100 MHz
    Band 25/2 1900 MHz
    Max Gain
    60 dB
    Power
    110-240V AC, 50-60 Hz, 20 W
    Connectors
    F-Female
    Barrel
    SMA-Male
    Dimensions
    6.125 x 3.875 x 1.125 in.
    Weight
    10.2 oz.
    Specs Overview
    1
    The outside directional antenna picks up cell signal from the closest tower.
    2
    The booster then amplifies that signal.
    3
    The attached antenna broadcasts the amplified signal to nearby devices.
  • Five Band Cellular Signal Booster to improve calls, 5G, 4G, 3G mobile signal | Home and Office | Cover up to 10700…

    Five Band Cellular Signal Booster to improve calls, 5G, 4G, 3G mobile signal | Home and Office | Cover up to 10700…

    EPCOM · EP20M-5B-SA

    Cell Signal Booster to Improve 5G, 4G, 3G Data, VoLTE and convencional Voice. Special for Home or Office.
    Repeat and amplify the cellular signal to improve the Voice and 5G, 4G and 3G Data of your mobile device.
    Reduce missed and dropped VoLTE and convencional calls.
    It covers 1 or 5 rooms, up to 10700 square feet.
    Increase the signal level and extend the battery charge.
    Supports multiple devices simultaneously.
    Very easy and simple to install.
    Include:
    Amplifier.
    Power supply.
    The repeater has a Display (LCD) with which you can observe the intensity of the input signal as well as the output, which will help you obtain the maximum performance of the system.
    Main specifications:
    Triple Band: 700 MHz (Band 28), 850 MHz ( Band 5), 1900 MHz (Band 2), 2100 MHz (Band4) and 2500/2600 MHz (Band7).
    Gain: 70 dB + - 2 dB
    Output power: 20 dBm +- 2 dBm
    Consumption:
    Notes.
    It amplifies the 5G network in bands 66 and 7.
    The mobile phone or device must support the 5G network.
    The cell phone or device interacts between the 5G and 4G networks.
    5G network coverage is very limited.
  • 4G LTE, 3G and VOICE cellular signal amplifier KIT, with external directional antenna. Special to cover areas of up to…

    4G LTE, 3G and VOICE cellular signal amplifier KIT, with external directional antenna. Special to cover areas of up to…

    WILSONPRO / WEBOOST · 535-047

    Office 200 Cellular Signal Booster Kit, with external directional antenna.
    Industrial commercial type cellular signal amplifier kit that supports multiple operators, technologies and users!
    The weBoost Office 200 amplifies weak cellular signals to provide reliable voice and data coverage, including 4G, inside homes and other buildings where outside signals cannot reach indoors. The Office 200 has an auto-optimizing microprocessor and a built-in graphical signal meter. The Uplink and Downlink signal level indicator display makes it easy for the integrator or installer to determine the direction of the cell tower and the strongest signal available, greatly reducing installation time.
    Like all Wilson Amplifier Repeaters, the Office 200 features cell site protections that prevent any possibility of interference with cell towers.
    CHARACTERISTICS
    • With external directional antenna.
    • Ideal amplifier system for small and medium companies
    • Covers up to 4,300 square meters
    • Comes with LCD touch screen for ease of use
    • Allows manual control of frequency bands
    • Works in operator networks
    SPECIFICATIONS
    • Max Gain: 74 dB
    • Max Power: 22 dBm
    • Impedance: 50 Ohm
    • Power: 12 Vcc, 3 A.
    • Connectors: N Female
    • Booster Dimensions: 27.30 x 36.19 x 5.71 cm
    • Booster Weight: 3.49 kg
  • 4G, 3G, 2G and VOICE Cellular Signal Amplifier Kit. Supports Multiple Operators, Devices and Technologies…

    4G, 3G, 2G and VOICE Cellular Signal Amplifier Kit. Supports Multiple Operators, Devices and Technologies…

    EPCOM · EP-5G-PBS

    Cell Signal Booster Kit to Improve 4G LTE, 3G Data and Voice. Special for Home or Office.
    Repeat and amplify the cellular signal to improve the Voice and 4G LTE and 3G Data of your mobile device.
    Reduce missed and drop calls.
    It covers 1 or 3 rooms, up to 5300 square feet.
    Increase the signal level and extend the battery charge.
    Supports multiple devices simultaneously.
    Very easy and simple to install.
    The kit includes practically what you need to improve or create a cell zone.
    A Triple band repeater (850 MHz, 1900(+) MHz and 1700/2100(+) MHz).
    Frequency bands: B5, B2/25 and B4/66.
    An antenna log. For exterior.
    An type panel directional antenna. For interior.
    Coaxial cable jumpers to interconnect the antennas to the amplifier.
    Power supply for the repeater.
    The repeater has a Display (LCD) with which you can observe the intensity of the input signal as well as the output, which will help you obtain the maximum performance of the system.
    Main specifications:
    Triple Band: 850 MHz ( Band 5), 1900 MHz (Band 2 and 25) and 1700/2100 MHz (Band4 and 66)
    Gain: 68 dB + - 3 dB
    Output power: 19 dBm
    Consumption:

  • Office 200 Cell Signal Booster for 2G, 3G, 4G and conventional and VoLTE calls/ Special to customize it with antennas,…

    WILSONPRO / WEBOOST · 570047

    Designed to provide maximum coverage for luxury homes, large commercial retail or any other application needing better cell signal, the Office 200 signal booster significantly amplifies cellular signals for all carriers with up to 72 dB of gain, resulting in reliable 3G, 4G LTE cell coverage.
    Includes: Amplifier and power Supply.
    See: Optional Accessories.
    CHARACTERISTICS
    • Ideal amplifier system for small and medium companies
    • Covers 12,000 to 35,000 square feet*
    • Comes with LCD touch screen for ease of use
    • Allows manual control of frequency bands
    • Works in operator networks
    SPECIFICATIONS
    • Max Gain: 72 dB
    • Max Power: 15 dBm
    • Impedance: 50 Ohm
    • Power: 12 Vcc, 3 A.
    • Connectors: N Female
    • Booster Dimensions: 15.25 x 10.75 x 2.25 in
    • Booster Weight: 7.7 lb
    It may vary due to different factors:
    For technology; 2G, 3G, 4G
    Signal intensity that reaches the outside of the building.
    For walls, slabs and obstructions inside the building.
    Due to the type and length of coaxial cables used.
    For additional accessories such as dividers and separators.

  • 4G LTE, 3G and Voice cellular signal amplifier KIT. Special for commercial areas that receive the signal from multiple…

    WILSONPRO / WEBOOST · 460-049

    Product Description Enterprise 1300
    The WilsonPro Enterprise 1300 in-building cellular amplifier that represents the latest in cell signal boosting technology-starting with its all-new Multi-Tower Targeting Technology™.
    Depending on cell tower locations, it can run up to three outdoor antennas; each dedicated to a specific frequency band to collectively amplify signals from multiple towers. Based on user need or preference, Enterprise 1300 also utilizes “common mode” as a default; requiring only a single outdoor antenna to deliver enhanced cell signal coverage within an area up to 40,000 sq. ft.
    With wired or LTE access (using the built-in cellular modem) to the WilsonPro Cloud for remote functionality, integrators and building managers can remotely manage, monitor, and adjust the Enterprise 1300 using a smartphone or tablet. Immediate notifications are received via email or text. Designed to reach towers at greater distances, it also produces up to 26 dBm in uplink and up to 17 dBm in downlink-making it one of the most powerful amplifiers within its price range.
    Designed for wall-mount configuration. A rack-mount option available (Enterprise 1300R.)
    Click here for a recording of the webinar on the Enterprise 1300/4300.
    5G Ready - WilsonPro cellular signal amplifiers will work for the next decade and beyond.
    Key Features
    Wired or LTE access (using the built-in cellular modem) to the WilsonPro Cloud
    Remote management, monitoring, and adjustment of amplifier via smartphone or tablet
    XDR Technology (eXtended Dynamic Range) automatically adjusts gain and will remain operational, even in the presence of a very strong outside signal
    +26 dBm maximum uplink power, +17 dBm maximum downlink power
    Covers up to 40,000 sq. ft. with enhanced cell signal on all available network speeds
    Color LCD touchscreen display, indicating gain and power levels of each band, for easy antenna setup, control, and troubleshooting
    Wall-mount installation
    FCC-approved and compatible with all US mobile carrier networks
    Three outdoor antenna ports for exclusive Multi-Tower Targeting Technology
    Specs Model 460149 Connectors N-Female Dimensions 19 x 12x 2.5 in Frequency Band 12/17 700 MHz Band 25 1900 MHz Band 13 700 MHz Band 5 850 MHz Band 4 1700/2100 MHz Impedance 50 Ohm Max Gain 70 dB Power 110 - 240 V AC, 50 - 60 Hz, 30 W Weight 16.515 lbs
    Kit Includes
    Enterprise 1300SKU: 460149
    50 Ohm Wide Band Directional Antenna
    4G Dome Antenna (50 Ohm)
    Lightning Surge Protector (50 Ohm)
    2 ft. Wilson-400 Ultra Low-Loss Cable
    100 ft. Wilson-400 Ultra Low-Loss Cable x2
    How it Works Enterprise 1300 1
    The powerful antenna receives cellular signal and delivers it to the booster.
    2
    The booster amplifies the signal and serves as a relay between the cellular modem and the cell tower.
    3
    The cellular modem performs more efficiently as it feeds data to the booster and stays connected to the network.
    Ideal For
    Large Commercial Spacesup to 40,000 sq. ft.

  • ENTERPRISE 4300 Cell Signal Booster (Custom kit 460653)| +26 dBm max uplink power, +17 dBm max downlink power on each…

    WILSONPRO / WEBOOST · 461-053

    Enterprise 4300
    The WilsonPro Enterprise 4300 in-building cellular amplifier is the culmination of the latest cell signal boosting innovations-centered on its all-new Multi-Tower Targeting technology.
    Depending on cell tower locations, it can run up to three outdoor antennas; each dedicated to a specific frequency band to collectively amplify signals from multiple towers. Based on user need or preference, Enterprise 4300 can also utilize “common mode” as its default; requiring only a single outdoor antenna to deliver enhanced cell signal coverage to its four indoor antennas.
    With wired or LTE access (using the built-in cellular modem) to the WilsonPro Cloud for remote functionality, integrators and building managers can remotely manage, monitor, and adjust the Enterprise 4300 using a smartphone or tablet. Immediate notifications are received via email or text. Designed to reach towers at greater distances, it also produces up to 26 dBm in uplink and up to 17 dBm in downlink-making it one of the most powerful amplifiers within its price range.
    Relying on its four independently controlled indoor antenna ports, equipped with up to 17 dBm downlink power of their own, the Enterprise 4300 amplifies coverage area up to 100,000 sq. ft per amplifier.
    Designed for wall-mount configuration. A rack-mount option available (Enterprise 4300R.)
    Click here for a recording of the webinar on the Enterprise 1300/4300.
    5G Ready - WilsonPro cellular signal amplifiers will work for the next decade and beyond.
    How it Works Enterprise 4300 1
    The powerful antenna receives cellular signal and delivers it to the booster. ​
    2
    The booster amplifies the signal and serves as a relay between the cellular modem and the cell tower.
    3
    The cellular modem performs more efficiently as it feeds data to the booster and stays connected to the network.
    Specs Model 460653 Connectors N-Female Dimensions 19 x 12 x 2.5 in Frequency Band 25 1900 MHz Band 4 1700/2100 MHz Band 13 700 MHz Band 5 850 MHz Band 12/17 700 MHz Impedance 50 Ohm Max Gain 70 dB Power 110 - 240 V AC, 50 - 60 Hz, 30 W Weight 16.93 lbs
    Key Features
    Four independently controlled indoor antenna ports to power four indoor antennas
    Wired or LTE access (using the built-in cellular modem) to the WilsonPro Cloud
    Remote management, monitoring, and adjustment of amplifier via smartphone or tablet
    XDR Technology (eXtended Dynamic Range) automatically adjusts gain and will remain operational, even in the presence of a very strong outside signal
    +26 dBm max uplink power, +17 dBm max downlink power on each indoor antenna port
    Covers up to 100,000 sq. ft. per amplifier with enhanced cell signal on all available network speeds
    Color LCD touchscreen display, indicating gain and power levels of each band, for easy antenna setup, control, and troubleshooting
    Wall-mount installation
    FCC-approved and compatible with all US mobile carrier networks
    Three outdoor antenna ports for exclusive Multi-Tower Targeting Technology
    Kit Includes
    Enterprise 4300(Whit power cord)
    <img…

  • 4G LTE, 3G and Voice cellular signal amplifier KIT. Special for commercial areas that receive the signal from multiple…

    WILSONPRO / WEBOOST · 460150

    Product Description Enterprise 1300
    The WilsonPro Enterprise 1300 in-building cellular amplifier that represents the latest in cell signal boosting technology-starting with its all-new Multi-Tower Targeting Technology™.
    Depending on cell tower locations, it can run up to three outdoor antennas; each dedicated to a specific frequency band to collectively amplify signals from multiple towers. Based on user need or preference, Enterprise 1300 also utilizes “common mode” as a default; requiring only a single outdoor antenna to deliver enhanced cell signal coverage within an area up to 40,000 sq. ft.
    With wired or LTE access (using the built-in cellular modem) to the WilsonPro Cloud for remote functionality, integrators and building managers can remotely manage, monitor, and adjust the Enterprise 1300 using a smartphone or tablet. Immediate notifications are received via email or text. Designed to reach towers at greater distances, it also produces up to 26 dBm in uplink and up to 17 dBm in downlink-making it one of the most powerful amplifiers within its price range.
    Designed for wall-mount configuration. A rack-mount option available (Enterprise 1300R.)
    Click here for a recording of the webinar on the Enterprise 1300/4300.
    5G Ready - WilsonPro cellular signal amplifiers will work for the next decade and beyond.
    Key Features
    Wired or LTE access (using the built-in cellular modem) to the WilsonPro Cloud
    Remote management, monitoring, and adjustment of amplifier via smartphone or tablet
    XDR Technology (eXtended Dynamic Range) automatically adjusts gain and will remain operational, even in the presence of a very strong outside signal
    +26 dBm maximum uplink power, +17 dBm maximum downlink power
    Covers up to 40,000 sq. ft. with enhanced cell signal on all available network speeds
    Color LCD touchscreen display, indicating gain and power levels of each band, for easy antenna setup, control, and troubleshooting
    Wall-mount installation
    FCC-approved and compatible with all US mobile carrier networks
    Three outdoor antenna ports for exclusive Multi-Tower Targeting Technology
    Specs Model 460149 Connectors N-Female Dimensions 19 x 12x 2.5 in Frequency Band 12/17 700 MHz Band 25 1900 MHz Band 13 700 MHz Band 5 850 MHz Band 4 1700/2100 MHz Impedance 50 Ohm Max Gain 70 dB Power 110 - 240 V AC, 50 - 60 Hz, 30 W Weight 16.515 lbs
    Kit Includes
    Enterprise 1300SKU: 460149
    50 Ohm Wide Band Directional Antenna
    4G Dome Antenna (50 Ohm)
    Lightning Surge Protector (50 Ohm)
    2 ft. Wilson-400 Ultra Low-Loss Cable
    100 ft. Wilson-400 Ultra Low-Loss Cable x2
    How it Works Enterprise 1300 1
    The powerful antenna receives cellular signal and delivers it to the booster.
    2
    The booster amplifies the signal and serves as a relay between the cellular modem and the cell tower.
    3
    The cellular modem performs more efficiently as it feeds data to the booster and stays connected to the network.
    Ideal For
    Large Commercial Spacesup to 40,000 sq. ft.

  • Booster de Señal de Celular para Hogar / Coverage de Un Espacio Grande / Listo para 5G

    WEBOOST / WILSON ELECTRONICS · 470166

    The weBoost Home Studio cellular signal booster provides a robust solution for improving weak indoor cellular coverage in home offices, living rooms, or apartments. It is designed to enhance network speeds across multiple signal bands within a large room. Additionally, it is 5G-ready, ensuring improved signal quality for the next decade. Installation is simple thanks to its internal antenna, which connects directly to the powerful amplifier, reducing dropped calls and enhancing voice, video, and data speeds.
    Technical Specifications Key Features
    Compatible with all U.S. carriers, including Verizon, AT&T, T-Mobile, and UScellular
    Boosts signal up to +60 dB
    Designed and assembled in the U.S.
    Coverage for a single room
    Functionality
    Enhances reliability and strength of cellular signal in large spaces
    Supports multiple users and devices simultaneously
    5G-ready
    Advanced Specifications Interfaces & Connectivity
    F-Female | SMA-Male connectors
    Requirements & Compatibility
    Power: 110-240V AC, 60-80 Hz, 20 W
    75 Ohm impedance
    Supports multiple bands: Band 12/17 (700 MHz), Band 13 (700 MHz), Band 5 (850 MHz), Band 4 (1700/2100 MHz), Band 25/2 (1900 MHz)
    Applications & Use Cases Home Use
    Ideal for improving cellular coverage in home offices, living rooms, or apartments.

No products match your search, but we can still try to source it. Use the button below.

Don't see what you need?

We carry far more than we can list, and we can often source hard-to-find radios, RF gear and parts on request. Tell us what you're after and we'll try to source it and send you a quote.

Message us and we'll try to source it & send you a quote →
Quote0