Racks and Cabinets

64 Racks and Cabinets from Bell Communications, authorized Motorola distributor in Kingston, Jamaica since 1996. Including racks accesories and cabinets, exterior cabinets. Brands: LINKEDPRO BY EPCOM, EPCOM INDUSTRIAL, PRECISION.

64 of 64 products

2U Fixed Tray for Rack, Place Equipment as well as Keypad and Mouse
LINKEDPRO BY EPCOM · S-CH-19X13.5T
Sheet plate AWG: 16
Color: black
Rack units: 2
Application: indoor
Max suggested load for tray: 18 Kg
Max suggested load for keyboard support: 8 Kg
*Colors may vary
*Weight without accessories and packaging
ICOM Radio Enclosure, ICF50/6061 and Power Supply SEC1212/23
EPCOM INDUSTRIAL · SR-5061
Cabinet for ICOM Radios
Sheet gauge: 22
Color: black
Application: Indoor
It doesn't include power supplies or radios
*The colors of the products may change for technical improvements.
*The declared weight is for the equipment without accessories and without packaging.
Enclosure Design for Battery Storage (PL110D12) and Electrical Equipment
EPCOM INDUSTRIAL · SYG-028
Functional features:
• Pair of side holes to secure the enclosure.
• Specially designed to store 1 battery: PL10012, PL4012, PV27DC and ASBP110A (not included).
• Preparation for cable passing.
• Security plate.
• Lateral ventilation.
• Ideal for the integration of emergency stations.
Physical Characteristics:
• Paint: electrostatic black.
• Application: indoor.
• Material: 18-gauge steel.
• Rack units: N / A.
• Weight: 8.24 Kg.
• External dimensions: 475 x 363 x 263 mm (W x H x D).
Compatible equipment (not included):
• Outdoor equipment that needs shelter.
• To safeguard battery (ASBP110A, PL10012, PL4012, PV27DC.).
Recommendations:
• Ensure that the installation is performed by a trained professional.
• Check if the hardware is properly adjusted periodically.
• Set up a maintenance plan to clean the hardware.
10 Outlet 15 Amp Vertical Multiple Outlet PDU, Plug Type (NEMA 5-15R), 19" Rack, Input/Output Voltage: 120Vac
LINKEDPRO BY EPCOM · TCMSR19
Main Features.
• Compatible with closed cabinets, type GAC or GAD.
• 10 outlets to power other devices.
• Can be installed on the ground or open racks with squared base.
• Includes an 8.20 ft (2.5 m) power cable.
• Connector type: NEMA 5-15
• Can be installed directly on the wall.
Physical Characteristics.
• Application: Interior.
• Dimensions: 3.85 x 37.48 x 3.93" (98 x 952 x 100 mm) (Width x Height x Depth)
• Weight: 6.12 lb (2.78 kg).
• Paint: powder black paint (Electrostatic process).
Electrical Characteristics.
• Includes 15 Amp restarter.
• Voltage input/output: 110 VAC 60 Hz.
Front Cover for Repeater for 2 Radios 102 and 302 Series
EPCOM INDUSTRIAL · TG-03771/81
For G037P with 2 openings for 102 / 302 series (not included).
- Sheet gauge: 11-gauge Aluminum.
- Color: black.
- Rack units: 2.
- Application: indoor.
* Product colors may change for technical improvements.
* The declared weight is of the equipment without accessories and without packaging.
Front Cover for Slave Repeater G series
EPCOM INDUSTRIAL · TSK-RE01G
For G037P with KENWOOD G SERIES (not included).
-Sheet gauge: 11-gauge Aluminum.
-Color: black.
-Rack units: 2.
-Application: indoor.
* Product colors may change for technical improvements.
* The declared weight is of the equipment without accessories and without packaging.
19" 1U Horizontal Cable Management with Metallic Cover
LINKEDPRO BY EPCOM · LPCM-04
General Characteristics
Brand: LinkedPro
Code: LPCM04
Description: Horizontal cable organizer, 1 Unit
Physical Characteristics
Material: Cold Rolled Steel Sheet
AWG: 18 and 22
Color: Black
Application: Interior
Dimensional Characteristics
Width: 20.16" (512 mm)
Height: 1.89" (48 mm)
Depth: 3.03" (77 mm)
19" 2U Horizontal Cable Management, Metal
LINKEDPRO BY EPCOM · LPCM-042U
Our EPCOM Industrial cable organizers are the best solution for display and organization in full radio communication systems, surveillance and wireless networks, and installation.
With the implementation of this product, you will have more control over your connections, extra protection for your wiring, and a flawless presentation. A 100% professional installation.
Functional features
Cover to secure wiring
Solid steel structure
Supports different gauges of wires
2 pieces: Base and cover
Physical Characteristics
Paint: Electrostatic Black
Application: Indoor
Material: Steel
Rack Units: 2
External dimensions: 20.15 x 3.50 x 2.95" (512 x 89 x 75 mm)
Recommendations
Ensure that the installation is performed by a trained professional
Check if the hardware is properly adjusted periodically
Set up a maintenance plan to clean the hardware
Rack Mount Assembly for Desktop Power Supply SEC-1212/SEC-1223/SEC-1235
SAMLEX · SEC-R1
Convenient 19" rack format featuring rigid metal construction. The 2U plate has a rack shelf that can be used with any Samlex SEC desktop power supply, providing a modular configurable system. Rack is sold separately.
SEC-R1 is compatible with the following Power Supply models:
• SEC-1212/SEC-1212CE
• SEC-1223/SEC-1223CE
• SEC-1235/SEC-1235M
• SEC-1223BBM/SEC-1223BBM-230
Adjustable Tray for 19" Rack with 4 Posts, 1 Rack Unit
LINKEDPRO BY EPCOM · CH-QR1
• Firm and adjustable structure, 4 points attachment.
• Openings for ventilation or securing equipment.
• Front and rear bumpers to prevent slipping.
Physical Characteristics:
• Application: indoor.
• Material: AWG 16 steel.
• Weight: 10.18 lb (4.62 kg)
• External dimensions: mm (W x H x D).
• Rack units: 1.
Painting:
• Color: black, semi-matte.
• 5-step electrostatic process: degreasing, rinsing, iron phosphate, rinse, and sealing.
• Polyester primer.
Blind Cover for 19" Rack 1 Unit.
LINKEDPRO BY EPCOM · STF-1U
The Linkedpro blind covers by epcom considerably improve the installation's appearance, providing adequate airflow inside the rack and reserving spaces for future installations.
Compatible with any 19-in Rack
Features
Paint: electrostatic black.
Application: indoor.
Material: high-quality steel 14.
Rack units: 3
Weight: 2.1 lb (0.95 Kg)
NetRunner™ Vertical Dual-Sided Manager, for Open Rack, 45RU, 4.9 in. Wide, Black
PANDUIT · WMPV45E
The NetRunner™ Vertical Cable Manager is a dual-sided cable manager that provides a cost-effective solution to organize, manage, and protect network cabling in telecommunication rooms and data centers. Cable management fingers simplify cable routing during installation and maintenance.
The bend radius control helps protect cables from kinks and snags, ensuring system performance and reliability. The manager is 45 RU, 5 inches wide x 12 inches deep, includes dual-hinging covers, and is black.
Specifications
Product Type: Dual-Sided Manager
Body Material: ABS
Orientation: Vertical
Cover Material: PVC
Finger Material: ABS
Dimensions (HxWxD): 83 x 4.9 x 12 in / 2108 x 125 x 306 mm
Number of Rack Units: 45
Environment: Indoor
Color: Black
Standards Met: RoHS Compliant
Includes: Manager, covers, hardware kit
Plastic Cabinet for Exterior (IP65) 3.93 x 2.67 x 1.96" (100 x 68 x 50 mm)
TXPRO · TXG-01-4
Dimensions: 3.93 x 2.67 x 1.96" (100 x 68 x 50 mm) (width x length x depth)
Protection: IP-65
Material: ABS Plastic.
Rear nut (4 pcs) for installation.
Exterior application.
Application:
Installation of PoEs in tower, post or wall.
Ideal for outdoor interconnections.
Surge protector storage.
Protects circuits or electrical equipment.
Solar energy applications.
We recommend the use of cable glands.
Plastic Connector Type Cable Gland, Cable Diameter: 10 - 14 mm
TXPRO · TXG-PG-16
Plastic Connector Type Cable Gland, Cable Diameter: 10 - 14 mm
Outer thread diameter 22mm (7/8")
Cabinet for radios PR5000 Series, DGM 5000, 5500, 8000, 8500, DM4000 and Power Supply SEC1212, SE1223
SAMLEX · 12430M
Cabinet for radios PR5000 Series, DGM 5000, 5500, 8000, 8500, DM4000 and Power Supply SEC1212, SE1223
IP65 Enclosure (Gray Plastic) for Outdoor (4.72 x 4.72 x 2.36 in)
TXPRO · TXG-01-52
• Dimensions: 4.72 x 4.72 x 2.36 in / 120 x 120 x 60 mm (width x length x depth)
• Protection: IP-65
• Material: ABS Plastic.
• Rear nut (4 pcs) for installation.
• Exterior application.
Application:
• POE's installation.
• Electrical connections.
• Electric boards storage.
• Solar energy applications.
IP65 Enclosure (Plastic), Outdoor/Indoor (4.53 x 3.46 x 2.17 in)
TXPRO · TXG-01-14
Dimensions: 4.53 x 3.46 x 2.17 in / 115 x 88 x 55 mm (width x length x depth)
Protection: IP-65
Material: ABS Plastic.
Rear nut (4 pcs) for installation.
Exterior application.
Application:
POE's installation.
Electrical connections.
Electric boards storage.
Solar energy applications.
Post or Tower Mounting for TXPRO Cabinets (Check Compatible Models)
EPCOM INDUSTRIAL · TX-PROM5
Post or Tower Mounting for TXPRO Cabinets
Compatible Models:
TXG-3040
TXG-2919S
TXG-0147
TXG-0383
TXG-0149
TXG-3545
TXG-0157
TXG-01571
TXG-4050
TXT-4050
TXG0235JK
Features
Material: rolled steel sheet.
Gauge: 16
Color: Beige.
Paint: Electrostatic powder paint.
Dimensions: 394 x 73 x 12 mm (width x height x depth).
The minimum distance between cabinet perforations: 200 mm
The maximum distance between cabinet perforations: 370 mm
Recommendations:
- During storage and transportation, the equipment must be stored in a dry place, free from humidity and direct contact with the sun and other climatic elements that may shorten the product's useful life.
- Avoid damaging the product before, during, or after the installation any surface damage could accelerate the generation of rust on the product.
Maintenance recommendations:
- We recommend constantly cleaning from dust and moisture to avoid particle accumulation.
- We recommend (especially in humid zones) the aesthetic touch-up with beige rain-resistant paint * to strengthen the protective layer and slow down the generation of rust.
*The painting process must be carried out on clean equipment, free of dust particles and moisture. It can be supported by the use of solvents for the pre-cleaning of the component.
*For further questions, consult the SYSCOM Engineering department.
Pole Mount for Enclosure SVR1419 Electrolytic Galvanized
EPCOM INDUSTRIAL · MP-1419-V4
Color: Grey (metallic)
Application: Outdoor
Designed for 3 to 6" external diameter poles
Includes counter gear for mast attachment (strip or clamps not required)
Compatible with SVR1419 and SVR1419G enclosure
Rack Plate Mount for 2 SEC Power Supplies SEC-1212, SEC-1223, SEC-1235
SAMLEX · SECR2
SEC-R2 rackmount plates are compatible with all Samlex SEC Series models of switching desktop power supplies ranging from 12 to 35 Amps. , these 19”, 2U assemblies are easily user configurable.
110 Vac Cooling Fan for Wall Cabinets, 2 Internal Outlets
LINKEDPRO BY EPCOM · LP-VENT-01
How does it work?
The fan LP-VENT-01 is installed on the ceiling of wall cabinets series GFP to provide airflow and dissipate the heat of the devices in the cabinet.
To facilitate installation, the fan includes two 110 Vac power outlets (max. 5A) on its side to supply DVR's, small power sources, or other similar systems.
Main Features:
Includes brackets and screws for easy installation.
Fan (1 pc) at 110 Vac with cable and plug.
Includes two internal outlets to power equipment.
Includes hardware for installation.
Model Compatibility:
SR-1906-GFP
SR-1909-GFP
SR-1912-GFP
SR-1916-GFP
SR-1924-GFP
Triple Fan Kit (4.72 x 4.72") 110 Vac for GAD Enclosures
LINKEDPRO BY EPCOM · LP-VENT-03
Main features:
Forced ventilation kit compatible with GAD (deep) floor cupboards.
Includes:
1- Bracket.
3- Fans 4.72 x 4.72 inches (12 x 12 cm). (110 Vac).
1- Screw kit for installation.
1- Cable and polarized plug.
Compatible with the model:
SR1980GAD
SR1965GAD
SR1942GAD
1U Sliding Shelf for 19" Rack, Depth 12"
LINKEDPRO BY EPCOM · SCH-19X12A
Characteristics:
Manufactured with steel
High-performance rails.
Black powder paint.
Depth: 12" (304.8 mm)
Projection distance: 12" (304.8 mm) from the rack to the front.
Maximum tray weight capacity: 22 lbs (10 kg) for 4-post rack (11lbs or 5 kg two-post rack).
Rack space: 1U.
Compatible with 2 or 4 post open and closed racks (see weight restrictions).
Rear Wall for SR-1906-GFP Cabinet
LINKEDPRO BY EPCOM · SR-1906-GFP-TT
TAPA TRASERA PARA Cabinet DE PARED SR1906GFP
19" 1U Sliding Rack Shelf for Keyboard and Mouse
LINKEDPRO BY EPCOM · SCH-19X-12AT
19" 1U Sliding Rack Shelf for Keyboard and Mouse
Physical Characteristics
Material: rolled steel sheet.
AWG: 18, 20.
Color: Black.
Application: Indoor
Special Characteristics:
Electrostatic powder paint
Dimensional Characteristics:
Weight: 4.05 Kg.
5U Blind Cover for 19" Rack
LINKEDPRO BY EPCOM · STF-5U
Features
• Paint: electrostatic black.
• Application: indoor.
• Material: high quality
• Rack units: 5
• Weight: 1.6 Kg.
Monitoring and Control Professional Station for Video Surveillance, Access Control, Alarms Central Purposes. Dark Metal…
EPCOM INDUSTRIAL · EM-S02
Main Features:
Designed for Video Surveillance, Access Control, Alarms Central. Monitoring and control purposes
Made in high resistance metal
Wood Covers Finished in Saller Lack polyurethane
General Features:
Available PC Carry.
Removable metal covers for cabling purposes
Included power outlet (8 Output)
Complement (not included) Domestic shelf EI-AFC-6050-3N
Physical and Electrical Features:
Dimensions: 51.57 x 30.07 x 31.53" (1310 x 764 x 801 mm)
The equipment is shipped disassembled and packed.
packing dimensions: 1430 x 850 x 270 mm
Power: 110Vac, Fuse 15A / 250Vac
Weight: 70 lb (31.6 Kg)
Version in clear tone:
Packing Design:
PDU for Distribution of Energy Basic with 8 Outlets NEMA 5-15R Rear and 2 Plugs 5-15R Front, 1 Rack Unit
CYBERPOWER · PDU15B2F8R
The CyberPower 10-outlet (2 Front/8 Rear) rack mount basic power distribution unit (PDU15B2F8R) provides 120V 15A output. It distributes power to 10 NEMA 5-15R receptacles from a single NEMA 5-15P plug, with unfiltered electrical pass-through.
Designed for datacenters and other electrically demanding applications, this unit has a rugged, industrial-grade metal housing and a 15-foot AC power cord. It can be mounted either horizontally or vertically, includes a cord retention tray and is ETL/RoHS certified.
Typical Applications
• Servers
• Network Devices
• Telecom Equipment
Features
• Basic PDU
• Switch-Free Design
• Industrial-Grade Metal Housing
Product Details
• Phase: Single
• Amps: 15A (Derated to 12A)
• Volts: 100 – 125 V
• Frequency: 50Hz/60Hz
• Plug type: NEMA 5-15P
• Outlets: 10 NEMA 5-15R
• Outlet location: 2 Front / 8 Rear
• Size: 1U Rackmount
• Dimensions (in.): 17.5W x 1.75H x 2.25D
• Cord length (ft.): 15
• Warranty: Limited lifetime
Steel Cabinet IP66 Outdoor (9.84 x 11.81 x 5.91 in) with Interior Back Cover and Lower Cover with Screws (Includes Lock…
PRECISION · PST-2530-15A
Steel cabinet for use in outdoor applications such as poles, telecommunication towers or wall where there is no protection against rain or excessive dust.
Physical Features:
Material: steel.
Paint: powder polyester base.
Protection level: IP66
Resistance against impacts: IK10
Backplate inner Material: galvanized steel thickness 1.5mm
Dimensions: 9.84 x 11.81 x 5.91 in (width x height x depth).
Includes:
Steel body and door.
Backplate for equipment assembly. 7.87 x 10.43 in (width x height)
Security lock with key (PSTK2L & PSTK2K)
Bottom cover for the installation of gland type connectors.
Packing
Application:
Installation of POE's in a tower, post or wall.
Battery storage.
Protection of peak protectors, fuses or electrical boards.
It is recommended to use gland type connectors for wire output (See models).
Technical note: Fan implementation is possible, however holes must be made manually in the cabinet. It is recommended to have a fresh air inlet at the bottom and a hot air outlet at the top, for this it is recommended the implementation of 2 model PST-BC-V60 (Not included) and it is necessary that at least one of them has a 60 x 60 mm fan, th recommended model is: FAN-602512 (Not included).
Installing this items will reduce the protection level (IP) of the cabinet but will improve heat dissipation.
Single Door Wall Mount Enclosure (11.81 x 15.75 x 7.87 in) with Metal Indoor Backplate
PRECISION · PST-3040-20A
Steel cabinet for use in outdoor applications such as poles, telecommunication towers, or walls where there is no protection against rain or excessive dust.
Physical Features:
Material: steel.
Paint: powder polyester base.
Protection level: IP66
Resistance against impacts: IK10
Backplate inner material: galvanized steel thickness 1.5mm
Dimensions: 11.81 x 15.75 x 7.87 in (width x height x depth).
Include:
Steel body and door.
Backplate for equipment assembly. 9.84 x 14.37 in (width x height)
Security lock with key (PSTK2L & PSTK2K)
Bottom cover for the installation of gland type connectors.
Packing
Application:
Installation of PoE's in a tower, post, or wall.
Package storage.
Protection of surge protectors, fuses, or electrical boards.
It is recommended to use gland type connectors for wire output (See models).
Technical note: Fan implementation is possible, however, holes must be made manually in the cabinet. It is recommended to have a fresh air inlet at the bottom and a hot air outlet at the top, for this it is recommended the implementation of 2 model PST-BC-V60 (Not included) and it is necessary that at least one of them has a 60 x 60 mm fan, the recommended model is FAN-602512 (Not included).
Installing these items will reduce the protection level (IP) of the cabinet but will improve heat dissipation.
Single Door Wall Mount Enclosure (15.75 x 15.75 x 7.87 in) and Metal Backplate for equipment assembly.
PRECISION · PST-4040-20A
Steel cabinet for use in outdoor applications such as poles, telecommunication towers, or walls where there is no protection against rain or excessive dust.
Physical Features:
Material: steel.
Paint: powder polyester base.
Protection level: IP66
Resistance against impacts: IK10
Backplate inner Material: galvanized steel thickness 1.5mm
Dimensions: 15.75 x 15.75 x 7.87 in (width x height x depth).
Includes:
Steel body and door.
Backplate for equipment assembly. 350 x 365 mm (width x height)
Security lock with key (PSTK2L & PSTK2K).
Bottom cover for the installation of gland-type connectors.
Packing
Application:
Installation of PoE's in a tower, post, or wall.
Battery storage.
Protection of surge protectors, fuses, or electrical boards.
It is recommended to use gland-type connectors for wire output (See models).
Technical note: Fan implementation is possible, however, holes must be made manually in the cabinet. It is recommended to have a fresh air inlet at the bottom and a hot air outlet at the top, for this it is recommended the implementation of 2 models PST-BC-V60 (Not included) and it is necessary that at least one of them has a 60 x 60 mm fan, the recommended model is FAN-602512 (Not included).
Installing this item will reduce the protection level (IP) of the cabinet but will improve heat dissipation.
"
Steel Cabinet, Outdoor IP66 (23.62 × 23.62 × 11.81 in) with Interior Metal Backplate
PRECISION · PST-6060-30A
Steel cabinet for use in outdoor applications such as poles, telecommunication towers, or walls where there is no protection against rain or excessive dust.
Physical Features:
Material: steel.
Paint: powder base polyester.
Protection level: IP66
Impact resistance: IK10
Backplate inner material: galvanized steel thickness 2mm
Dimensions: 23.62 × 23.62 × 11.81 in (width x height x depth).
Includes:
Steel body and door.
Backplate for equipment assembly. 13.78 x 22.24 in (width x height)
Security lock with key (PSTK2L & PSTK2K)
Bottom cover for the installation of gland type connectors.
Packing
Application:
Installation of PoE's in a tower, post, or wall.
Battery storage.
Protection of surge protectors, fuses, or electrical boards.
It is recommended to use gland type connectors for wire output (See models).
Technical note: Fan implementation is possible, however, holes must be made manually in the cabinet. It is recommended to have a fresh air inlet at the bottom and a hot air outlet at the top, for this it is recommended the implementation of 2 models PST-BC-V60 (Not included) and it is necessary that at least one of them has a 60 x 60 mm fan, the recommended model is FAN-602512 (Not included).
Installing these items will reduce the protection level (IP) of the cabinet but will improve heat dissipation.
PDU for Basic Energy Distribution with 10 Outlets NEMA 5-15R Rear, 1 Rack Units
CYBERPOWER · CPS1215RM
Engineered to distribute UPS, generator or utility AC power to equipment.
The CyberPower 10-outlet rack mount power distribution unit (PDU) provides 120V 15A output. It distributes power to 10 NEMA 5-15R receptacles from a single NEMA 5-15P input, with unfiltered electrical pass-through.
Designed for datacenters and other electrically demanding applications, this the unit has a durable metal housing and a 15-foot AC power cord. It can be mounted either horizontally or vertically, includes a cord retention tray and is ETL/RoHS certified.
Product Details
• Phase: Single
• Volts: 100 – 125 V
• Frequency: 60Hz
• Plug type: NEMA 5-15P
• Outlets: 10 NEMA 5-15R
• Outlet location: 10 Rear
• Size: 1U Rackmount
• Dimensions (in.): 17.25W x 1.75H x 4.75D
• Cord length (ft.): 15
• Warranty: 3 year
Stainless Steel Cabinet, Outdoor IP66 (800 x 1000 x 300 mm) and Galvanized inner plate.
PRECISION · PST-8010030-INOX-B
Stainless steel cabinet for outdoor applications such as poles, telecommunication towers, or walls. Recommended for areas with extreme humidity or corrosion. Physical Characteristics:Material: stainless steel.Protection level: IP66Impact resistance: IK10Dimensions: 800 x 1000 x 300 mm (width x height x depth).Includes: Stainless steel body and door.
Lock with key.
Galvanized inner plate. 750 x 965 mm (width x height), thickness 2mm
Stainless steel hinges Applications: PoE installation in towers, posts, or walls.Battery storage (we recommend adding ventilation).Protect surge suppressors, fuses, or electric boards.
Wall-mount brackets and Din-Rail to be offered separately.
Single door wall mount enclosure (15.75 x 23.62 x 9.84 in) and Metal Backplate for equipment assembly.
PRECISION · PST-4060-25A
Steel cabinet for use in outdoor applications such as poles, telecommunication towers, or walls where there is no protection against rain or excessive dust.
Physical characteristics:
Material: Steel
Painting: Polyester base powder.
Protection level: IP66
Resistance against impacts: IK10
Backplate inner Material: Galvanized steel thickness 2mm
Dimensions: 15.7 x 23.6 x 9.8"" (400 x 600 x 250 mm) (width x height x depth).
Includes:
Steel body and door.
Backplate for equipment assembly. 13.78 x 22.24 in (350 x 565 mm) (width x height)
Security lock with key (PSTK2L & PSTK2K)
Bottom cover for the installation of gland type connectors.
Packing
Packagingâ€‹:
Installation of POE's in tower, pole or wall.
Battery storage (it is recommended to add breathing).
Protection of peak protectors, fuses, or electrical boards.
It is recommended to use gland type connectors for wire output (See models).
Technical note: Fan implementation is possible, however, holes must be made manually in the cabinet. It is recommended to have a fresh air inlet at the bottom and a hot air outlet at the top, for this it is recommended the implementation of 2 models PST-BC-V60 (Not included) and it is necessary that at least one of them has a 60 x 60 mm fan, the recommended model is FAN-602512 (Not included).
Installing these items will reduce the protection level (IP) of the cabinet but will improve heat dissipation.
"
Single door wall mount enclosure (800 x 1200 x 400 mm). And Metal Backplate for mounting equipment.
PRECISION · PST-80120-40A
Steel cabinet for use in outdoor applications such as poles, telecommunication towers, or wall where there is no protection against rain or excessive dust.
Physical Characteristics:
Material: Steel.
Paint: Powder-based polyester.
Protection level: IP66
Impact resistance: IK10
Backplate inner material: Galvanized steel thickness 2mm
Dimensions: 800 x 1200 x 400 mm (with x height x depth).
Includes:
Steel body and door.
Backplate for mounting equipment. 750 x 1165 mm (with x height)
Security lock with key.
Bottom cover for the installation of gland type connectors.
Packaging.
Application:
Installation of POE's in tower, pole or wall.
Battery storage (add ventilation recommended).
Cabinet for surge protectors, fuses, or electrical boards.
It is recommended to use gland type connectors for wiring output (See models).
Technical note: Fan implementation is possible, however, holes must be made manually in the cabinet. It is recommended to have a fresh air inlet at the bottom and a hot air outlet at the top, for this it is recommended the implementation of 2 model PST-BC-V60 (Not included) and it is necessary that at least one of them has a 60 x 60 mm fan, the recommended model is FAN-602512 (Not included).
Installing these items will reduce the protection level (IP) of the cabinet but will improve heat dissipation.
19" Rack Shelf Compatible with Wall Enclosures GFP and GAP
LINKEDPRO BY EPCOM · SCH-GFP
19" rack shell Compatible with wall enclosures GFP and GAP.
Highlights:
Ideal for closed cabinets that 4 posts as the GFP line.
Adjustable rails to the desired depth (347-489 mm).
Ventilation for breathing or holding equipment.
Physical characteristics:
Gauge sheet: 16 and 18.
Color: Black, paint applied by the electrostatic process.
Rack units: 1U.
Weight: 2.3 kg.
Dimensions: 480 x 43 x 347-489 mm (width x height x depth).
Maximum recommended load: 20 kg.
Single Door Polyester Wall Mount Enclosure (11.81 x 15.74 x 7.87 In). And Plastic Backplate for equipment assembly.
PRECISION · PST-3040-20P
Polyester cabinet for use in outdoor applications such as poles, telecommunication towers, or walls where there is no protection against rain or excessive dust.
Physical Features:
Material: Polyester
Protection level: IP65.
Backplate Material: Polyester plate
Dimensions: 11.81 x 15.74 x 7.87 In (width x height x depth).
Standards: IP65 and RoHS.
Include:
Polyester body and door.
Backplate for equipment assembly. 286 x 310 mm (width x height)
Security lock with key.
Wall bracket (4 pcs).
Packing.
Application:
Installation of PoE's in a tower, post, or wall.
Package storage.
Protection of surge protectors, fuses, or electrical boards.
It is recommended to use gland type connectors for wire output (See models).
Technical note: Fan implementation is possible, however, holes must be made manually in the cabinet. It is recommended to have a fresh air inlet at the bottom and a hot air outlet at the top, for this it is recommended the implementation of 2 model PST-BC-V60 (Not included) and it is necessary that at least one of them has a 60 x 60 mm fan, the recommended model is FAN-602512 (Not included).
Installing this item will reduce the protection level (IP) of the cabinet but will improve heat dissipation.
Wall-Mount Swing Cabinet (with Rear Frame) with 19" Rack and 9 Units. Tempered Glass Window.
LINKEDPRO BY EPCOM · SR-1909-GAP-V4
Highlighted Features:
Installation Type: Wall-mounted.
The body rotates on its right (or left) axis for free access to equipment connections.
Tempered glass door.
Removable side panels.
The 4 rack posts can be adjusted for better equipment installation.
Security lock on the door (one key combination per lock).
Detachable door with reversible opening direction.
Prepared for 1 or 2 single fans (LP-VENT-BASIC) or 1 dual fan (LP-VENT-02V2)
Shipped unassembled.
Application:
Video surveillance systems.
Backup units.
Internet service distribution.
Two-way radio communication.
Radio communication.
Copper and fiber cable management.
Included Equipment:
Metal frame (top, sides, rack posts).
Black screws for assembly.
Mounting hardware for three rack-mounted devices (12 cage nuts, 12 screws, and washers).
User manual + warranty.
Packaging.
Physical Characteristics:
Application: Indoor.
High-quality steel.
Manufactured according to ANSI/TIA RS-310-D standards.
Weight: 26.28 Kg (without packaging).
Weight: 57.93 lbs (without packaging).
Load capacity: 45 Kg.
Load capacity: 99.21 lbs.
Dimensions: 24.76 x 19.17 x 23.70 inches (Width x Height x Depth).
Dimensions: 629 x 487 x 602 mm
Front to back rack distance: 20.79 inches.
Front to back rack distance: 528 mm.
Rack Units: 9.
Maximum working depth: 16.93 inches.
Maximum working depth: 430 mm.
Color: Semi-matte black.
Baked polyester-based coating.
Not prepared for floor use (not compatible with wheels).
Kit with 2 Fans 110 Vac and 3 Receptacles (4.72 x 4.72 in), for GAC, GFP, GAPV4 Enclosures
LINKEDPRO BY EPCOM · LP-VENT-02V2
Main features:
Forced ventilation kit compatible with GAD (deep) floor cabinets.
Includes:
1- Bracket.
2- Fans 4.72 x 4.72 inches (12 x 12 cm). (110 Vac).
1- Screw kit for installation.
1- Cable and polarized plug.
2- 110 vac receptacles.
19" 16U Swing-out Wall Mounted Cabinet, Tempered Glass Window
LINKEDPRO BY EPCOM · SR-1916-GAP-V4
Functional features:
• The body turns on its right axis to work freely with the equipment connections.
• Impact-resistant glass window.
• Removable side.
• Removable front racks.
• Double sheet (front door and side).
• Opening at the top and bottom for wiring to wall.
• Door can be placed to open in both directions.
• Remove the door.
• Welded frame body for more stability.
• Excellent for repeaters and surveillance equipment.
Application:
• Radio communication equipment such as repeaters and power supplies.
• Security monitoring stations, recorders and switches.
• Control data centers transmitting via air.
• Managing high-performance copper and fiber patch cable.
Physical Characteristics:
• Application: indoor.
• Material: 18-gauge steel (body) and 22-gauge steel (doors).
• Weight:
• Rack Units: 16.
• They are not prepared for use on the floor (not compatible with wheels)
Painting:
• Color: black, semi-matte.
• 5-step electrostatic process: degreasing, rinse, iron phosphate, rinse and sealed.
• Polyester primer.
Recommendations:
• Ensure that the installation is performed by a trained professional.
• Check if the hardware is properly adjusted periodically.
• Set up a maintenance plan to clean the hardware.
Lock with 2 Keys for Steel Cabinet Brand PRECISION
PRECISION · PST407
Features
Steel body with 2 keys.
Compatible with Precision Steel cabinets.
Number of locks per cabinet:
Cabinet from 0 a 23.62 in high uses 1 lock.
Cabinet from 23.66 a 39.37 in high uses 2 locks.
Cabinet of more of 39.37 in high uses 3 locks.
3-fan Cooling System for Racks, 110 Vac, 4.72 x 4.72 in
LINKEDPRO BY EPCOM · LP-VENT-03X3U
Main features:
Forced ventilation kit compatible with GAD (deep) floor cupboards.
Includes:
1- Bracket.
3- Fans 4.72 x 4.72 inches (12 x 12 cm). (110 Vac).
1- Screw kit for installation.
1- Cable and polarized plug.
Dimensions:
19 x 5.2 x 1.57 in / 483 x 133 x 40 mm (Width x Height x Depth).
Single door ABS Plastic enclosure (6.69 x 8.66 x 4.33 in).
PRECISION · PST-1722-11E
ABS Plastic cabinet for use in outdoor applications such as poles, telecommunication towers or wall where there is no protection against rain or excessive dust.
Physical Features:
Material: ABS Plastic.
Protection level:
Back plate material: ABS Plastic
Dimensions: 6.69 x 8.66 x 4.33 in (width x height x depth).
Include:
ABS body and door.
Packing.
Application:
Installation of PoE's in a tower, post or wall.
Package storage.
Protection of surge protectors, fuses or electrical boards.
It is recommended to use gland type connectors for wire output (See models).
Technical note: Fan implementation is possible, however holes must be made manually in the cabinet. It is recommended to have a fresh air inlet at the bottom and a hot air outlet at the top, for this it is recommended the implementation of 2 model PST-BC-V60 (Not included) and it is necessary that at least one of them has a 60 x 60 mm fan, th recommended model is: FAN-602512 (Not included).
Installing this items will reduce the protection level (IP) of the cabinet but will improve heat dissipation.
Single door ABS Plastic enclosure (7.48 × 11.42 × 5.51 in).
PRECISION · PST-1929-14E
ABS Plastic cabinet for use in outdoor applications such as poles, telecommunication towers or wall where there is no protection against rain or excessive dust.
Physical Features:
Material: ABS Plastic.
Protection level:
Back plate material: ABS Plastic
Dimensions: 7.48 × 11.42 × 5.51 in (width x height x depth).
Include:
ABS body and door.
Packing.
Application:
Installation of PoE's in a tower, post or wall.
Package storage.
Protection of surge protectors, fuses or electrical boards.
It is recommended to use gland type connectors for wire output (See models).
Technical note: Fan implementation is possible, however holes must be made manually in the cabinet. It is recommended to have a fresh air inlet at the bottom and a hot air outlet at the top, for this it is recommended the implementation of 2 model PST-BC-V60 (Not included) and it is necessary that at least one of them has a 60 x 60 mm fan, th recommended model is: FAN-602512 (Not included).
Installing these items will reduce the protection level (IP) of the cabinet but will improve heat dissipation.
"
110 Vac Cooling Fan for Wall Cabinets, 12 x 12 cm.
LINKEDPRO BY EPCOM · LP-VENT-BASIC
Main Features:
Includes bracket and screw for easy installation.
Fan dimensions: 12 x 12 cm.
Compatible with any cabinet that's compatible with fans 12 x 12 cm.
Includes connection cable of 1.6 m and NEMA plug 5-15 P.
Nominal voltage operation: 110 Vac.
Includes fasteners for fixing.
19" 24U Outdoor Enclosure for Post/Tower/Wall with Fans and Thermostat
LINKEDPRO BY EPCOM · LP-FORTE-24U-R3
Outdoor Enclosure with Fans and Thermostat with a Rack of 19" of 24 U.
Main features:
Outdoor cabinet with fans.
Standard 19 "with 24U.
The fans are controlled by an adjustable thermostat.
Bracket for wall or pole installation not included.
It has 4 internal terminals for the connection of equipment to 110 VAC.
Internal stage (at the back) for the installation of equipment.
Safety lock.
Physical Characteristics:
Material: Galvanized steel sheet.
Coating: Electrostatic powder coating
Standard design: 19 "rack (ANSI / TIA RS-310-D)
Rack Units: 24 U
Dimensions: 600 x 1280 x 598 mm (width x height x depth)
Weight: 78Kg (172 lb)
Made in Mexico
Blind Cover for 19" Rack 1 Unit.
LINKEDPRO BY EPCOM · LP-MPM-5U
Features
• Paint: electrostatic black.
• Application: indoor.
• Material: high-quality steel 14.
• Rack units: 3
• Weight: 2.1 lb (0.95 Kg)
Metal Cover for EIGTR19
EPCOM INDUSTRIAL · EI-GTR-19C
Metal cover for EIGTR19
Vertical Power Strip of 10 Outlets (NEMA 5-15R) Input/Output Voltage 120 Vac/15A Compatible with EIRL and EIQR Racks
LINKEDPRO BY EPCOM · TCM-SR19KIT
Vertical power strip TCMSR19
Replacement Cam Lock with Key for Metallic Cabinets
LINKEDPRO BY EPCOM · MS-456-17D
Compatible with the following models
GABVID1R2
GABVID2R2
GABVID3R2
GABVID4R2
SR1906GFP
SR1909GFP
SR1912GFP
SR1916GFP
SR1924GFP
SR1906GAPV4 (only front door).
SR1909GAPV4 (only front door).
SR1912GAPV4 (only front door).
SR1916GAPV4 (only front door).
SR1924GAPV4 (only front door).
24U Professional Network Cabinet with 19" Standard Rack and Glass Door 23.62 in x 39.37 in (600 mm Width x 1000 mm…
LINKEDPRO BY EPCOM · LP-60100-24U-R2
Highlighted Features:
Installation Type: Floor-standing.
Front Door: Security 3-point lock with tempered glass window.
Removable Side Panels: With lock.
Adjustable Rack Posts: The 4 rack posts can be moved forward or backward for better equipment installation.
Security Locks: Unique key for each lock.
Removable Doors: With the option to change door swing direction.
Fan Support: Ready for 1 LP-VENT-03 or LP-VENT-02V2 fan set (not included).
Levelers Included.
Wheels Sold Separately: Model LP-CAST-72-SET.
Ships Assembled.
Application:
Video surveillance systems
Backup power units
Internet service distribution
Two-way radio communication
General radio communication
Copper and fiber cabling management
Included Components:
Metal body (side covers, rack posts, front and rear doors)
Black assembly screws
Hardware for mounting up to 3 devices on rack posts (32 cage nuts, 32 screws, 32 washers)
User manual + warranty
Levelers
1 basic cable organizer: LP-ORG-45S
Packaging
Physical Specifications:
Application: Indoor use
Material: Premium-grade steel
Compliance: Manufactured according to ANSI/TIA RS-310-D standard
Weight: 67.69 kg / 149.26 lbs (without packaging)
Load Capacity: 567 kg / 1,249.17 lbs total
Max Load per Unit: 23 kg / 50.71 lbs
Dimensions: 600 x 1170 x 1058 mm / 23.62 x 46.06 x 41.65 in (Width x Height x Depth)
Rack Units: 24U
Max Working Depth: 920 mm / 36.22 in
Color: Semi-matte black
Finish: Polyester baked paint process
19" 42U Professional Cabinet for Telecommunications, Standard Rack and Security Glass Door, 600 mm Height x 1200 mm…
LINKEDPRO BY EPCOM · LP-60100-42U-R2
Highlighted Features:
Installation Type: Floor.
Front door with 3-point security lock and tempered glass window.
Removable side panels with locks.
Adjustable rack posts for better equipment installation.
Security locks with a unique key for each lock.
Removable doors with an option to change the opening direction.
Fan preparation for one LP-VENT-03 set or one LP-VENT-02V2 (not included).
Leveling feet included.
Wheels sold separately, model LP-CAST-72-SET.
Pre-assembled shipping.
Applications:
Video surveillance systems.
Backup power units.
Internet service distribution.
Two-way radio communication.
Cable management for copper and fiber cabling.
Included Equipment:
Metal body (side panels, rack posts, front and rear doors).
Black screws for assembly.
Hardware for installing three devices on rack posts (56 cage nuts, 56 screws, and 56 washers).
User manual + warranty.
Leveling feet.
One simple cable organizer (LP-ORG-45S).
Packaging.
Physical Characteristics:
Application: Indoor.
Material: Premium-grade steel.
Manufactured according to ANSI/TIA RS-310-D standards.
Weight: 224.12 lbs (without packaging).
Load capacity: 2795 lbs / 1268 Kg.
Maximum load per unit: 50.71 lbs / 23 Kg.
Dimensions: 23.62 x 77.56 x 41.65 inches (Width x Height x Depth).
Dimensions (mm): 600 x 1970 x 1058 mm
Rack Units: 42.
Maximum working depth: 36.22 inches / 920 mm.
Color: Semi-matte black.
Finish: Polyester-based baked enamel paint.
19" 24U Professional Network Cabinet, Standard Rack, Depth 600 mm
LINKEDPRO BY EPCOM · LP-6060-24U-R2
• Reinforced front door with elegant security glass (the door is dismountable).
• Steel back door with lock (the door is dismountable).
• Dismountable laterals cant be removed without the key.
• Ventilation in laterals, door, and lid to improve heat dissipation.
• Comes with 4 adjustable standard Rack posts of 19" (2 frontal posts and 2 rear posts).
• Complies with norm ANSI/TIA RS-310-D.
• Comes with preparation to install wheels model: ROD4.25” (Not included).
• Excellent for network equipment, security, and radiocommunication that need to be sheltered from dust and debris and isolated from the general public.
• Includes 32 screws for a rack and 32 screws with washer for device installation.
Physical Characteristics:
• Paint: Electrostatic black.
• Application: Interior.
• Material: Quality steel.
• Rack Units: 24.
• Weight: 65 Kg.
• Exterior dimensions: 600 x 1192 x 605 mm (width x height x depth)
FOR ANY DOUBT OR COMMENT CONTACT THE ENGINEERING DEPARTMENT.
Frontal View.
Backdoor View.
Closed Cabinet View.
"
19" 42U Professional Cabinet for Networks, Standard Rack and Crystal Door, Manufactured in Steel
LINKEDPRO BY EPCOM · LP-6060-42U-R2
• Reinforced frontal door with elegant Security Glass with security lock (Removable door)
• Back steel door with lock (Removable door)
• Removal lateral of security (It can not be removed if you do not have the key)
• Lateral ventilation, doors and superior cover to improve heat dissipation
• Comes with preparation to install wheels model: ROD4.25” (not included)
• Excellent for Network equipment, security, and radio communication they want to be sheltered from dust and isolated from the general public.
• 12 screws for the rack and 12 screws with washer for equipment installation
Physical Characteristics:
• Paint: Electrostatic black
• Application: Indoor
• Material: High-quality steel
• Rack units: 42 U
• Weight:
• Exterior dimensions:
Heavy Duty Casters for Server Racks/Cabinets - Set of 4 Wheels for Linkedpro Cabinets (2 with brakes).
LINKEDPRO BY EPCOM · LP-CAST-72-SET
Set of 4 Wheels for Linkedpro Cabinets (2 with brakes).
Set of 12 dark filters for filter YH04B
LINKEDPRO BY EPCOM · YH04BF12
Set of 12 dark filters for filter YH04B
Galvanized Bracket for Pole or Wall Mounting Compatible with EIPCB Cabinets
EPCOM INDUSTRIAL · EI-PCB-40M-R2
Galvanized mounting for installation of cabinets in walls or poles.
Compatible with:
EI-PCB-4028-27
EI-PCB-40-40-30
EI-PCB-40106-30SD-R2
EI-PCB-40106-30VD-R2
EI-PCB-4073-30VD-R2
EI-PCB-4073-30SD-R2
19" 12U Professional Network Cabinet, Standard Rack, Depth 638 mm
LINKEDPRO BY EPCOM · LP-6060-12U
• Reinforced front door with elegant security glass (the door is dismountable).
• Steel back door with lock (the door is dismountable).
• Dismountable laterals cant be removed without the key.
• Ventilation in laterals, door, and lid to improve heat dissipation.
• Comes with 4 adjustable standard Rack posts of 19" (2 frontal posts and 2 rear posts).
• Complies with norm ANSI/TIA RS-310-D.
• Comes with preparation to install wheels model: LP-CAST-72-SET. (Not included).
• Excellent for network equipment, security, and radiocommunication that need to be sheltered from dust and debris and isolated from the general public.
• Includes 32 screws for a rack and 32 screws with washer for device installation.
Physical Characteristics:
• Paint: Electrostatic black.
• Application: Interior.
• Material: Quality steel.
• Rack Units: 12.
• Weight: 65 Kg.
• Exterior dimensions: 664 x 620 x 638 mm (width x height x depth)
Frontal View.
Backdoor View.
Closed Cabinet View.
"
Bracket for Wall, Tower, or Pole Compatible with LP-FORTE-09U-R3
LINKEDPRO BY EPCOM · LP-FORTE-09U-BRA-R2
Bracket LP-FORTE-09UR3 for wall, pole or tower.
Main features:
Compatible with LPFORTE-09U-R3
For wall installation, anchors are needed (not included) which must be selected according to the type of wall material.
Physical characteristics:
Manufacturing material: galvanized steel sheet.
Dimensions: mm (Width x Height x Depth)
Weight:
Wall/Pole Bracket for LP-FORTE-09U-R3 and LP-FORTE-24U-R3
LINKEDPRO BY EPCOM · LP-FORTE-16U-BRA-R2
Mounting bracket for LP-FORTE-16U-R3 and LP-FORTE-24U-R3 for wall, pole, or tower.
Main features:
Compatible with LPFORTE-16U-R3 and LPFORTE-24U-R3
For wall installation, it requires wall anchors that must be chosen depending on the wall material (not included).
Physical characteristics:
Manufacturing material: galvanized steel sheet.
Security Metallic Cabinet for DVR/NVR. Max. Size of DVR/NVR: 315 x 62 x 288 mm (Width. x Height x Depth)
EPCOM INDUSTRIAL · GABVID1R3
Functional Characteristics:
Fully removable front cover.
Double plastic window on the front.
Belt with clasp to hold the recorder.
Side vents.
Features perforations to be fixed to a table or desk.
Compatible with 19" rack installation adding the accessory GAB-VID1-SOP.
Application and Operation:
The team's goal is to safely safeguard your DVR / NVR to prevent:
Access to buttons to turn off or modify established settings.
Disconnection of network or power cabling (in equipment).
Direct physical damage to the casing due to blows from other elements.
Physical Characteristics:
Application: indoor.
Material: Steel Gauge 20.
Weight: 2.91 Kg.
Outdoor cabinet dimensions:
Width: 364 mm
Height: 73 mm
Depth: 457 mm
Fan compatibility: 60 x 60 mm (2 Pcs).
Passthrough: 100 x 41 mm.
Physical Characteristics: Maximum Dimension of VCR to Protect:
Width: 315 mm
Height: 62 mm
Depth: 288 mm
Paint:
Black color semi-matte note.
Applied by electrostatic 5-step baking process: degreasing, rinsing, iron phosphate, rinsing, and sealing.
Paint: base polyester.
Metallic Cabinet for DVR/NVR
EPCOM INDUSTRIAL · GABVID4R3
Functional Characteristics:
Dismountable front cover.
Double plastic window on the front.
Belt with clasp to hold the recorder.
Side ventilation.
It has perforations to be fixed to a table or desk.
Application and Operation:
The team's goal is to safely safeguard your DVR / NVR to prevent:
Access to buttons to turn off or modify established settings.
Disconnection of network or power cabling (in equipment).
Direct physical damage to the casing due to blows from other elements.
Physical Characteristics:
Application: Indoor.
Material: Steel Gauge 20.
Weight: 11.32 kg.
Dimension outdoor cabinet:
Width: 525 mm
Height: 180 mm
Depth: 677 mm
Fan compatibility: 120 x 120 mm (1 piece).
Cable gland: 150 x 123 mm.
Physical Characteristics: Maximum dimensions of VCR to protect:
Width: 440 mm
Height: 177 mm
Depth: 462 mm
Pintura:
Color Black tonalidad semi-mate.
Aplicada por proceso electrostático horneado de 5 pasos: Desengrasado, enjuague, fosfato de Hierro, enjuague y sellado.
Pintura Base Poliester.
19" Rack Equipment Shelf, 13.38 in (34 cm) Depth, Black, 2U
LINKEDPRO BY EPCOM · SCH-342U
LinkedPro rack shelves provide a versatile solution for a wide range of applications.
Main Features:
Color: Black
Application: Indoor
Rack Units: 2U
Maximum working depth: 13.38 in / 34 cm
Suggested maximum load: 33.06 lbs / 15 kg
Note:
If the equipment is mounted on a rack from another brand, the LP-TAT-12 mounting hardware must be purchased separately.

No products match your search, but we can still try to source it. Use the button below.

Don't see what you need?

We carry far more than we can list, and we can often source hard-to-find radios, RF gear and parts on request. Tell us what you're after and we'll try to source it and send you a quote.

Message us and we'll try to source it & send you a quote →

Racks and Cabinets

2U Fixed Tray for Rack, Place Equipment as well as Keypad and Mouse

ICOM Radio Enclosure, ICF50/6061 and Power Supply SEC1212/23

Enclosure Design for Battery Storage (PL110D12) and Electrical Equipment

10 Outlet 15 Amp Vertical Multiple Outlet PDU, Plug Type (NEMA 5-15R), 19" Rack, Input/Output Voltage: 120Vac

Front Cover for Repeater for 2 Radios 102 and 302 Series

Front Cover for Slave Repeater G series

19" 1U Horizontal Cable Management with Metallic Cover

19" 2U Horizontal Cable Management, Metal

Rack Mount Assembly for Desktop Power Supply SEC-1212/SEC-1223/SEC-1235

Adjustable Tray for 19" Rack with 4 Posts, 1 Rack Unit

Blind Cover for 19" Rack 1 Unit.

NetRunner™ Vertical Dual-Sided Manager, for Open Rack, 45RU, 4.9 in. Wide, Black

Plastic Cabinet for Exterior (IP65) 3.93 x 2.67 x 1.96" (100 x 68 x 50 mm)

Plastic Connector Type Cable Gland, Cable Diameter: 10 - 14 mm

Cabinet for radios PR5000 Series, DGM 5000, 5500, 8000, 8500, DM4000 and Power Supply SEC1212, SE1223

IP65 Enclosure (Gray Plastic) for Outdoor (4.72 x 4.72 x 2.36 in)

IP65 Enclosure (Plastic), Outdoor/Indoor (4.53 x 3.46 x 2.17 in)

Post or Tower Mounting for TXPRO Cabinets (Check Compatible Models)

Pole Mount for Enclosure SVR1419 Electrolytic Galvanized

Rack Plate Mount for 2 SEC Power Supplies SEC-1212, SEC-1223, SEC-1235

110 Vac Cooling Fan for Wall Cabinets, 2 Internal Outlets

Triple Fan Kit (4.72 x 4.72") 110 Vac for GAD Enclosures

1U Sliding Shelf for 19" Rack, Depth 12"

Rear Wall for SR-1906-GFP Cabinet

19" 1U Sliding Rack Shelf for Keyboard and Mouse

5U Blind Cover for 19" Rack

Monitoring and Control Professional Station for Video Surveillance, Access Control, Alarms Central Purposes. Dark Metal…

PDU for Distribution of Energy Basic with 8 Outlets NEMA 5-15R Rear and 2 Plugs 5-15R Front, 1 Rack Unit

Steel Cabinet IP66 Outdoor (9.84 x 11.81 x 5.91 in) with Interior Back Cover and Lower Cover with Screws (Includes Lock…

Single Door Wall Mount Enclosure (11.81 x 15.75 x 7.87 in) with Metal Indoor Backplate

Single Door Wall Mount Enclosure (15.75 x 15.75 x 7.87 in) and Metal Backplate for equipment assembly.

Steel Cabinet, Outdoor IP66 (23.62 × 23.62 × 11.81 in) with Interior Metal Backplate

PDU for Basic Energy Distribution with 10 Outlets NEMA 5-15R Rear, 1 Rack Units

Stainless Steel Cabinet, Outdoor IP66 (800 x 1000 x 300 mm) and Galvanized inner plate.

Single door wall mount enclosure (15.75 x 23.62 x 9.84 in) and Metal Backplate for equipment assembly.

Single door wall mount enclosure (800 x 1200 x 400 mm). And Metal Backplate for mounting equipment.

19" Rack Shelf Compatible with Wall Enclosures GFP and GAP

Single Door Polyester Wall Mount Enclosure (11.81 x 15.74 x 7.87 In). And Plastic Backplate for equipment assembly.

Wall-Mount Swing Cabinet (with Rear Frame) with 19" Rack and 9 Units. Tempered Glass Window.

Kit with 2 Fans 110 Vac and 3 Receptacles (4.72 x 4.72 in), for GAC, GFP, GAPV4 Enclosures

19" 16U Swing-out Wall Mounted Cabinet, Tempered Glass Window

Lock with 2 Keys for Steel Cabinet Brand PRECISION

3-fan Cooling System for Racks, 110 Vac, 4.72 x 4.72 in

Single door ABS Plastic enclosure (6.69 x 8.66 x 4.33 in).

Single door ABS Plastic enclosure (7.48 × 11.42 × 5.51 in).

110 Vac Cooling Fan for Wall Cabinets, 12 x 12 cm.

19" 24U Outdoor Enclosure for Post/Tower/Wall with Fans and Thermostat

Blind Cover for 19" Rack 1 Unit.

Metal Cover for EIGTR19

Vertical Power Strip of 10 Outlets (NEMA 5-15R) Input/Output Voltage 120 Vac/15A Compatible with EIRL and EIQR Racks

Replacement Cam Lock with Key for Metallic Cabinets

24U Professional Network Cabinet with 19" Standard Rack and Glass Door 23.62 in x 39.37 in (600 mm Width x 1000 mm…

19" 42U Professional Cabinet for Telecommunications, Standard Rack and Security Glass Door, 600 mm Height x 1200 mm…

19" 24U Professional Network Cabinet, Standard Rack, Depth 600 mm

19" 42U Professional Cabinet for Networks, Standard Rack and Crystal Door, Manufactured in Steel

Heavy Duty Casters for Server Racks/Cabinets - Set of 4 Wheels for Linkedpro Cabinets (2 with brakes).

Set of 12 dark filters for filter YH04B

Galvanized Bracket for Pole or Wall Mounting Compatible with EIPCB Cabinets

19" 12U Professional Network Cabinet, Standard Rack, Depth 638 mm

Bracket for Wall, Tower, or Pole Compatible with LP-FORTE-09U-R3

Wall/Pole Bracket for LP-FORTE-09U-R3 and LP-FORTE-24U-R3

Security Metallic Cabinet for DVR/NVR. Max. Size of DVR/NVR: 315 x 62 x 288 mm (Width. x Height x Depth)

Metallic Cabinet for DVR/NVR

19" Rack Equipment Shelf, 13.38 in (34 cm) Depth, Black, 2U

Don't see what you need?