BELL COMMUNICATIONS← Back to home

Cables

74 Cables from Bell Communications, authorized Motorola distributor in Kingston, Jamaica since 1996. Including jumpers, coaxials. Brands: EPCOM INDUSTRIAL, ANDREW / COMMSCOPE, TEMPO.

74 of 74 products

  • 2 Port Entrance Panel 4"

    2 Port Entrance Panel 4"

    ANDREW / COMMSCOPE · 204673-2A

    Number of Ports: 2
    Panel Type: Multiple
    Color: Gray
    Entry Panel Port Size: 101.6 mm   |   4.0 in
    Includes: Entry cap   |   Hardware   |   Port
    Material Type   Aluminum
    Ordering Note: CommScope® non-standard product
    Package Quantity: 1
    1
  • RG58U Cable Copper Braid Shield 95%, Insulation: Polyethylene

    RG58U Cable Copper Braid Shield 95%, Insulation: Polyethylene

    BELDEN · 8240/1000

    Type RG-58A / U, 20 AWG solid .033 "bare copper conductor, polyethylene insulation, tinned copper braid shield (95% coverage), PVC jacket.
    Impedance: 52 Ohms.
    External Diameter: 4.90 mm.
    Speed Factor: 66%.
    Attenuation in 30 m. UHF 450 MHz: 8.4 dB.
    Internal Conductor AWG: 20 Solid copper.
    Insulation: Polyethylene.
    UL flame test: VW-1
    Inductance: 0.26248 (pF/m)
    Indoor applications
    Shielding: Copper braided mesh 95%.
    Weight per meter. 0.052 kg.
    *Price per meter.
  • Belden Cable Duobond II Shield + 90% Tinned Copper Braid, Insulation: Polyethylene Semi-Solid

    Belden Cable Duobond II Shield + 90% Tinned Copper Braid, Insulation: Polyethylene Semi-Solid

    BELDEN · 9913/1000

    Bare copper conductor 10 AWG .108 ", semi-solid polyethylene insulation, Duobond® II, tinned copper braid shielding (90% coverage), PVC cover.
    Advantage :
    Coaxial that complies with the RG8 / U standard
    Pure copper conductor, and solid type for less attenuation (multi-filar version: 9913F)
    Polyethylene insulation for better propagation speed (84%)
    Double shielding:
    Aluminum sheet attached to the insulation to prevent wrinkles in the connectorization ("bonded duo foil", Belden patent)
    90% dense mesh to avoid interference noise, copper (maximum conductivity) with tin bath (to prevent moisture from entering).
    Low loss (series "low loss" of Belden): at 30 meters, only 2.6dB @ 400Mhz
    High power: 619 Watts @ 400 Mhz
    High voltage supported 600V RMS
    Minimum capacitance (electrostatic charge): 24.6 picofarads per foot
    Wide temperature range: from -40 ℃ to + 80 ℃
    Supports maximum pulling force: 300 pounds
    Features
    Impedance: 50 Ohms.
    Outside Diameter; .405 in. 10.29mm
    Speed ​​Factor: 84%.
    Attenuation in 30 meters. UHF 450 MHz.2.7 dB.
    Internal conductor AWG gauge: 10 (.108) Solid copper.
    Insulation: Semi-solid polyethylene.
    Shielding: Duobond II + 90% tinned copper braided mesh.
    * Price per reel of 1000 ft.
  • HELIAX Andrew Automated Preparation Cable Tool, Coaxial Cable, Corrugated Copper, 7/8 in, Black PE Jacket

    HELIAX Andrew Automated Preparation Cable Tool, Coaxial Cable, Corrugated Copper, 7/8 in, Black PE Jacket

    ANDREW / COMMSCOPE · AVA550

    AVA5-50 HELIAX® Andrew Virtual Air™ Coaxial Cable
    Introduction
    The AVA5-50 HELIAX® Andrew Virtual Air™ is an advanced, high-quality coaxial cable developed by CommScope. Designed for wireless applications, this cable provides high flexibility, reliability, and electrical efficiency, making it the ideal choice for your telecommunications projects. With a 100% corrugated copper shield and black PE jacket, this cable is perfect for a wide range of environmental conditions, ensuring optimal and long-lasting performance.
    ******Price per meter******
    Technical Specifications
    Product Classification
    Product Type: Wireless Coaxial Cable
    Product Brand: HELIAX®
    Product Series: AVA5-50
    Ordering Note: CommScope Standard Product [Global]
    General Specifications
    Flexibility: Standard
    Jacket Color: Black
    Dimensions
    Diameter over Dielectric: 24.13 mm (0.95 in)
    Diameter over Jacket: 27.991 mm (1.102 in)
    Inner Conductor Diameter: 9.449 mm (0.372 in)
    Outer Conductor Diameter: 25.4 mm (1 in)
    Nominal Size: 7/8 in
    Electrical Specifications
    Cable Impedance: 50 ohm ±1 ohm
    Capacitance: 73 pF/m (22.25 pF/ft)
    DC Resistance, Inner Conductor: 1.435 ohms/km (0.437 ohms/kft)
    DC Resistance, Outer Conductor: 1.116 ohms/km (0.34 ohms/kft)
    DC Test Voltage: 6000 V
    Inductance: 0.184 µH/m (0.056 µH/ft)
    Insulation Resistance: 100000 MOhms-km
    Jacket Spark Test Voltage [rms]: 8000 V
    Operating Frequency Band: 1 – 5000 MHz
    Peak Power: 91 kW
    Velocity of Propagation: 91 %
    VSWR / Return Loss (dB):
    680–800 MHz: 1.13 / 24.3 dB
    800–960 MHz: 1.13 / 24.3 dB
    1700–2200 MHz: 1.13 / 24.3 dB
    Attenuation
    Frequency [MHz]: Attenuation [dB/100 m] | Attenuation [dB/100 ft] | Average Power [kW]
    1.0: 0.113 | 0.034 | 74.43
    2.0: 0.16 | 0.049 | 52.56
    10.0: 0.359 | 0.11 | 23.37
    50.0: 0.814 | 0.248 | 10.32
    100.0: 1.162 | 0.354 | 7.23
    200.0: 1.665 | 0.507 | 5.05
    400.0: 2.398 | 0.731 | 3.5
    800.0: 3.478 | 1.06 | 2.42
    1000.0: 3.927 | 1.197 | 2.14
    2000.0: 5.771 | 1.759 | 1.46
    3000.0: 7.272 | 2.217 | 1.15
    5000.0: 9.806 | 2.989 | 0.86
    Materials
  • 1000 ft Cable Reel, 7/8 in AVA550.

    1000 ft Cable Reel, 7/8 in AVA550.

    ANDREW / COMMSCOPE · AVA5-50/1000

    Electrical Specifications Cable Impedance 50 ohm ±1 ohm Capacitance 73 pF/m | 22.25 pF/ft dc Resistance, Inner Conductor 1.435 ohms/km | 0.437 ohms/kft dc Resistance, Outer Conductor 1.116 ohms/km | 0.34 ohms/kft dc Test Voltage 6000 V Inductance 0.184 µH/m | 0.056 µH/ft Insulation Resistance 100000 MOhms-km Jacket Spark Test Voltage (rms) 8000 V Operating Frequency Band 1 – 5000 MHz Peak Power 91 kW
    Velocity
    PRICE PER SPOOL
    91 %
  • HELIAX Superflexible Low Density Foam Coaxial Cable, Corrugated Copper Shield, Black PE Jacket.

    HELIAX Superflexible Low Density Foam Coaxial Cable, Corrugated Copper Shield, Black PE Jacket.

    ANDREW / COMMSCOPE · FSJ-150A

    Electrical Specifications:
    • Cable impedance: 50 Ohms ± 1 Ohm
    • Capacitance: 24.2 pF/ft  /  79.4 pF/m
    • DC Voltage test: 1600 V
    • Inductance 0.200 μH/m  /  0.061 μH/ft
    • Insulation resistance 100000 Mohms•mi
    • Jacket spark voltage test (rms) 5000 V
    • Operating frequency band: 1 - 18000 MHz
    • Peak power: 6.4 kW
    • Velocity: 82%
    Frequency Band      VSWR  Return Loss
    (dB)  680 - 960 MHz  1.2  20.8  1700 - 2200 MHz  1.2  20.8  2200 - 2700 MHz  1.43  15
  • Black Self-fusing Tape for Outdoors 15 ft

    Black Self-fusing Tape for Outdoors 15 ft

    ANDREW / COMMSCOPE · FTT-B

    • Black Selffusing Tape.
    • Length: 15 ft.
    • Width: 1.50 in.
    Specifications
    • Application: Provides additional moisture seal for cable connections
    • Color: Black
    • Material Type: Silicone tape
    • Package Quantity: 2
  • Support Hoisting Grip for 7/8 in Coaxial Cable

    Support Hoisting Grip for 7/8 in Coaxial Cable

    ANDREW / COMMSCOPE · L5S-GRIP

    <table border=1 cellspacing=
  • Heliax Low Density Foam Coaxial Cable, Corrugated Copper, 1/2", Black PE Jacket, 1,000 ft. Reel

    Heliax Low Density Foam Coaxial Cable, Corrugated Copper, 1/2", Black PE Jacket, 1,000 ft. Reel

    ANDREW · LDF4-50A/1000

    • Impedance: 50 Ω.
    • External diameter: 11 mm
    • Speed Factor: 88 %
    • Attenuation in 30 mts: UHF 450 MHz: 2.29 dB
    • Attenuation in 30 mts: UHF 800 MHz: 3.12 dB
    • Internal Diameter Conductor: 3.1 mm
    • Insulation: Dielectric Foam
    • Plating: Copper
    • Weight by meter: 0.12 kg
    *PRICE PER REEL*
  • EASIAX Manual Cable Preparation Tool for FSJ1-50A and FSJ4-50B coaxial cable

    EASIAX Manual Cable Preparation Tool for FSJ1-50A and FSJ4-50B coaxial cable

    ANDREW / COMMSCOPE · MCPT-1412

    Tool Type   Manual cable preparation tool Application   Prepares cable for connector attachment Cutting Blade Life   25 cable preparations Cutting Blades Included   1 Jacket Blades Included   1 Material Type, Body   Engineered plastic Ordering Note   CommScope® standard product (Global) Package Quantity   1
  • 23.62 in RG-142/U Coaxial Cble, 50 Ohm, BNC Male to Mini UHF Male Connectors

    23.62 in RG-142/U Coaxial Cble, 50 Ohm, BNC Male to Mini UHF Male Connectors

    EPCOM INDUSTRIAL · SBNC-142-MIN-60

    Coaxial Cable RG-142/U, BNC Male to Mini UHF Male Connectors.
    Length: 23.62" (60 cm).
    Connector A: BNC Male.
    Connector B: Mini UHF Male.
    Any cable, any length, any connector, any quantity.
    The best machines... The best connectors!
  • RG-142/U Cable of 60 cms. with, BNC Male to N Male Connectors.

    RG-142/U Cable of 60 cms. with, BNC Male to N Male Connectors.

    EPCOM INDUSTRIAL · SBNC-142-N-60

    RG-142/U Cable, BNC Male to N Male Connectors.
    Length: 23.62" (60 cm).
    Connector A: BNC Male.
    Connector B: N Male.
    Any cable, any length, any connector, any quantity.
    The best machines... The best connectors!
  • 3.6 ft RG-214/U Coaxial Cable with BNC Male to UHF Male (PL-259) Connectors

    3.6 ft RG-214/U Coaxial Cable with BNC Male to UHF Male (PL-259) Connectors

    EPCOM INDUSTRIAL · SBNC-214-UHF-110

    3.6 ft RG-214/U Coaxial Cable with BNC Male to UHF Male (PL-259) Connectors.
    Lenght: 3.6 ft / 110 cm.
    Connector A: BNC Male.
    Connector B: UHF Male (PL-259).
    Any cable, any length, any connector, any amount.
  • SnapSeal Entry Cushion with 3 Holes for 7/8 in Corrugated Coaxial Cable

    SnapSeal Entry Cushion with 3 Holes for 7/8 in Corrugated Coaxial Cable

    ANDREW / COMMSCOPE · SEC-378

    Cable Type   Corrugated Cables per Cushion   3 Color   Black Includes   Compression ring   |   SnapSeal™ entry cushion Material Type   Thermoplastic elastomer (TPE) Ordering Note   CommScope® non-standard product Package Quantity   1
  • SnapStak Installation Tool

    SnapStak Installation Tool

    ANDREW / COMMSCOPE · SHT-4

    Tool to install snap-in hangers
  • 3.28 ft Jumper RG-142/U Coaxial Cable with N Male to Mini UHF Male Connectors

    3.28 ft Jumper RG-142/U Coaxial Cable with N Male to Mini UHF Male Connectors

    EPCOM INDUSTRIAL · SN-142-MIN-100

    Length: 11.8" (30 cms).
    Connector A: N Male.
    Connector B: Mini UHF Male.
    The best Machinery ... The best connectors!
  • 5.9 ft Jumper with RG-142/U Coaxial Cable and N Male / N Male Connectors

    5.9 ft Jumper with RG-142/U Coaxial Cable and N Male / N Male Connectors

    EPCOM INDUSTRIAL · SN-142-N-180

    5.9 ft Jumper with RG-142/U Coaxial Cable and N Male / N Male Connectors
    Length: 5.9 ft (180 cm).
    Connector A: N Male.
    Connector B: N Male.
    Any cable, any length, any connector, any amount.
    The best Machinery ... The best connectors!
  • 3.6 ft RG-142/U Coaxial Cable with N Male / UHF Male Connectors (PL-259)

    3.6 ft RG-142/U Coaxial Cable with N Male / UHF Male Connectors (PL-259)

    EPCOM INDUSTRIAL · SN-142-UHF-110

    RG-142/U Coaxial Cable of 110 cm., with N Male to UHF Male (PL-259) connectors.
    Lenght: 3.6 ft / 110 cm.
    Connector A: N Male.
    Connector B: UHF Male (PL-259).
    Any cable, any length, any connector, any amount.
  • 5.9 ft RG-142/U Coaxial Cable, N Male / UHF Male Connectors (PL-259)

    5.9 ft RG-142/U Coaxial Cable, N Male / UHF Male Connectors (PL-259)

    EPCOM INDUSTRIAL · SN-142-UHF-180

    RG-142/U Coaxial Cable of 5.9 ft., with N Male to UHF Male (PL-259) connectors.
    Lenght: 5.9 ft / 180 cm.
    Connector A: N Male.
    Connector B: UHF Male (PL-259).
    Any cable, any length, any connector, any amount.
    The best machinery. The best connectors!
  • 1.96 ft RG-142/U Coaxial Cable with N Male / UHF Male Connectors (PL-259)

    1.96 ft RG-142/U Coaxial Cable with N Male / UHF Male Connectors (PL-259)

    EPCOM INDUSTRIAL · SN-142-UHF-60

    RG-142/U Coaxial Cable of 1.96 ft., with N Male to UHF Male (PL-259) connectors.
    Lenght: 1.96 ft /60 cm.
    Connector A: N Male.
    Connector B: UHF Male (PL-259).
    Any cable, any length, any connector, any amount.
  • 3.6 ft RG-214/U Coaxial Cable with N Male UHF Male (PL-259) Connectors

    3.6 ft RG-214/U Coaxial Cable with N Male UHF Male (PL-259) Connectors

    EPCOM INDUSTRIAL · SN-214-UHF-110

    3.6 ft RG-214/U Coaxial Cable with N Male UHF Male (PL-259) Connectors.
    Lenght: 3.6 ft / 110 cm.
    Connector A: N Male.
    Connector B: UHF Male (PL-259).
    Any cable, any length, any connector, any amount.
  • 5.9 ft RG-214/U Coaxial Cable with N Male / UHF Male Connectors (PL-259)

    5.9 ft RG-214/U Coaxial Cable with N Male / UHF Male Connectors (PL-259)

    EPCOM INDUSTRIAL · SN-214-UHF-180

    5.9 ft RG-214/U Coaxial Cable with N Male / UHF Male Connectors (PL-259).
    Lenght: 5.9 ft / 180 cm.
    Connector A: N Male.
    Connector B: UHF Male (PL-259).
    Any cable, any length, any connector, any amount.
  • 23.62" RG-214/U Coaxial Cable with N Male to UHF Male Connectors (PL-259)

    23.62" RG-214/U Coaxial Cable with N Male to UHF Male Connectors (PL-259)

    EPCOM INDUSTRIAL · SN-214-UHF-60

    23.62" RG-214/U Coaxial Cable with N Male to UHF Male Connectors (PL-259).
    Lenght: 23.62" / 60 cm.
    Connector A: N Male.
    Connector B: UHF Male (PL-259).
    Any cable, any length, any connector, any amount.
  • 1.96 ft Jumper RG-316 Cable with N Female / RP SMA Male Connectors

    1.96 ft Jumper RG-316 Cable with N Female / RP SMA Male Connectors

    EPCOM INDUSTRIAL · SNH-316-SMAI-60

    Length: 1.96 ft / 0.6 m.
    Connector A: N Female.
    Connector B: RP SMA Male.
    Application:
    Connection between wireless network equipment (21-105 and EOC-3220 EXT) and antenna / coaxial protectors / amplifiers.
    Recommended in:
    UBIQUITI
    The best machinery... The best connectors!
  • Threeway Snapin Standoff Adapter for 1"-2" round members

    Threeway Snapin Standoff Adapter for 1"-2" round members

    ANDREW / COMMSCOPE · STS-312

    Three­way Snap­in Stand­off Adapter for 1"–2" round members Includes:  SA­38, Universal Stand­off Adapter 31670­1, Round Member Adapter for 1"–2" round members Package with 10 pieces
  • 3.6 ft Jumper RG-142/U Coaxial Cable with UHF Male (PL-259) Connectors

    3.6 ft Jumper RG-142/U Coaxial Cable with UHF Male (PL-259) Connectors

    EPCOM INDUSTRIAL · SUHF-142-UHF-110

    3.6 ft Jumper RG-142/U Coaxial Cable with UHF Male (PL-259) Connectors.
    Lenght: 3.6 ft / 110 cm.
    Connector A: UHF Male (PL-259).
    Connector B: UHF Male (PL-259).
    Any cable, any length, any connector, any amount.
  • 1.96 ft RG-142/U Coacial Cable, UHF Male / UHF Male Connectors (P;-259)

    1.96 ft RG-142/U Coacial Cable, UHF Male / UHF Male Connectors (P;-259)

    EPCOM INDUSTRIAL · SUHF-142-UHF-60

    RG-142/U Coaxial Cable of 60 cm, with UHF Male to UHF Male (PL-259) connectors.
    Lenght: 1.96 ft / 60 cm.
    Connector A: UHF Male (PL-259).
    Connector B: UHF Male (PL-259).
    Any cable, any length, any connector, any amount.
  • 5.9 ft Jumper RG-241/U Coaxial Cable with UHF Male / UHF Male (PL-259) Connectors

    5.9 ft Jumper RG-241/U Coaxial Cable with UHF Male / UHF Male (PL-259) Connectors

    EPCOM INDUSTRIAL · SUHF-214-UHF-180

    5.9 ft Jumper RG-241/U Coaxial Cable with UHF Male / UHF Male (PL-259) Connectors.
    Lenght: 5.9 ft / 180 cm.
    Connector A: UHF Male (PL-259).
    Connector B: UHF Male (PL-259).
    Any cable, any length, any connector, any amount.
  • 11 in Cable Interconnection with UHF Male Connectors, 166 - 174 MHz for WP-639

    11 in Cable Interconnection with UHF Male Connectors, 166 - 174 MHz for WP-639

    EPCOM INDUSTRIAL · SUHF-214-UHF-28

    11 in Cable Interconnection with UHF Male Connectors, 166 - 174 MHz for WP-639
  • 1.96 ft RG-214/U Coaxial Cable with UHF Male Connectors (PL-259)

    1.96 ft RG-214/U Coaxial Cable with UHF Male Connectors (PL-259)

    EPCOM INDUSTRIAL · SUHF-214-UHF-60

    RG-214/U Coaxial Cable of 1.96 ft, with UHF Male to UHF Male (PL-259) connectors.
    Lenght: 1.96 ft / 60 cm.
    Connector A: UHF Male (PL-259).
    Connector B: UHF Male (PL-259).
    Any cable, any length, any connector, any amount.
  • Interconnection Jumper between Preselector and Multicoupler of length dependent on frequencies

    Interconnection Jumper between Preselector and Multicoupler of length dependent on frequencies

    TELEWAVE, INC · TW2

    Interconnection Jumper between Preselector and Multicoupler of length dependent on frequencies.
    Cable Type: RG-214/U Length: According to Operating Frequencies. Connectors: N Males.
  • EZfit Manual Cable Preparation Tool for 7/8 in coaxial cable

    EZfit Manual Cable Preparation Tool for 7/8 in coaxial cable

    ANDREW / COMMSCOPE · 78-HPT

    Tool Type   Manual cable preparation tool Application   Prepares cable for connector attachment Brand   EZfit® Combination Blades Included   2 Cutting Blade Life   150 cable preparations Includes   One AVA5-50 tool bit   |   One cutting tool body   |   One FXL-780 tool bit   |   One hex wrench   |   Ten saw guides Jacket Blades Included   1 Material Type, Blade   Hardened tool steel Material Type, Body   Engineered plastic Ordering Note   CommScope® standard product in Europe, the Middle East, and Africa   |   CommScope® standard product in Mexico, Central America, and South America Package Quantity   1
  • RG-8 1000 ft Cable Reel, Flexible Low Loss Communications Coax 50 Ohms

    RG-8 1000 ft Cable Reel, Flexible Low Loss Communications Coax 50 Ohms

    Times Microwave · LMR-400/1000

    Flexible low loss communications cable ideal for jumper assemblies in wireless communications systems and any application requiring a low loss RF cable.
    Application: Outdoor.
    Inner Conductor: Solid BCCAI 2.74 mm.
    Dielectric: Foam Polyethylene 7.24 mm.
    Outer Conductor: Aluminum Tape 7.39 mm.
    Overall Braid: Tinned Cooper 8.13 mm.
    Jacket: PE 10.29 mm.
    Attenuation at 150 MHz: 5 dB/100 m.
    Attenuation at 450 MHz: 8.9 dB/100 m.
    Impedance: 50 Ohm.
    Propagation speed: 85%
    Weight: 0.10 kg/ m.
    Avg. Power KW: 0.83 at 450 MHz.
    Operating Temperature Range: -40 to 85 ºC
  • Miniature Click-on Hanger for 9–12 mm cable

    Miniature Click-on Hanger for 9–12 mm cable

    ANDREW / COMMSCOPE · 912M-CLICK

    Hanger Type   Click-on hanger Cables per Hanger   2 Color   Black Material Type   Engineered plastic Maximum Stack Height   3 Ordering Note   CommScope® standard product in Mexico, Central America, and South America Package Quantity   10
    Click-On Series
    Double cable clamp for cable diameters from 0.354 in to 0.472 in
    Pack of 10 pieces.
    Requires adapter and screws (see accessories).
  • Single Hanger Kit for 1/2 in Coaxial Cable, Single Stack; includes Hardware and Angle Adapter

    Single Hanger Kit for 1/2 in Coaxial Cable, Single Stack; includes Hardware and Angle Adapter

    ANDREW / COMMSCOPE · SHK-12-1-P

    • Hanger type: Composite clamp
    • Brand: ValuSite™
    • Cables per hanger: 1
    • Color: Black
    • Includes: Angle adapter / Hardware
    • Material type: Engineered plastic / Stainless steel
    • Max. stack height: 1
    • Ordering note: CommScope® standard product in Asia Pacific
    Technical:
    • Corrosion resistance, minimum with no degradation: 500 hours in salt spray chamber
    • UV resistance, minimum with no degradation: 100 hours exposure in accelerated UV life chamber
    • Vibration survival: 4 hours at resonant frequency
    • Mounting: M8 hardware
    • Environmental strength capability: double cable weight
    • Dimensions: 1.02 x 1.82 x 1.02”  (26 x 46.29 x 25.82 mm)
  • Jumper MikroTik of 19.7"(Flex-Guide) with RP-SMA Male Connectors, Up to 6 GHz.

    Jumper MikroTik of 19.7"(Flex-Guide) with RP-SMA Male Connectors, Up to 6 GHz.

    MIKROTIK · ACRPSMA

    Super low loss 50cm long RPSMA cable for superior connection quality, suited for indoor and outdoor use, this cable provides superior matching and loss values.
    The name of this cable comes from combining the words “flexible” and “waveguide”, to denote the high-end features of this product.
    The inner conductor is silver-plated copper, and both connectors are soldered, not crimped, for the best possible signal quality. Ideally suited for our BaseBox and other products with RPSMA connectors, and works with most antennas.
    Product specifications Details Product code ACRPSMA Frequency up to 6GHz MTBF Approximately 100'000 hours at 25C Matching above -20dB Signal loss below 0.65dB Tested ambient temperature -55C to 125C
  • 11.81" (30 cm) Jumper Manufactured with RG-58U-SYS Cable, "N Male" and "TNC" Connector

    11.81" (30 cm) Jumper Manufactured with RG-58U-SYS Cable, "N Male" and "TNC" Connector

    EPCOM INDUSTRIAL · SN-58U-TNC-30

    Manufactured jumper with the following components:
    Cable:
    • Length: 11.81" (30 cm)
    • Impedance: 50 Ohms
    • Speed factor: 66%
    • Attenuation in 30 m UHF 450 MHz: 9.84 dB
    • Internal AWG caliber conductor: 20 (.37) solid copper
    • Isolation: Solid polyethylene
    • Plating: 95% Tinned copper braided mesh
    • Exterior diameter: 0.19" (4.90 mm)
    Connector A:
    • Connector type: N Male
    • Assembly mode: Folding ring
    • Bronze body: Nickel
    • Central contact: Gold
    • Dielectric isolation: Teflon
    Connector B:
    • Connector type: TNC Male
    • Dielectric isolation: Delrin
  • 4.92 ft Jumper Manufactured with RG-58U-SYS, "N" and "TNC" Connectors

    4.92 ft Jumper Manufactured with RG-58U-SYS, "N" and "TNC" Connectors

    EPCOM INDUSTRIAL · SN-58U-TNC-150

    Jumper is manufactured with the following components:Cable.-Length: 4.92 ft (150 cm).-Impedance: 50 Ohms.-Speed Factor: 66%.-Attenuation in 30 mts. UHF 450 MHz: 9.84 dB.-Internal conductor gauge AWG:20 (.37) solid copper.-Insulation: solid polyethylene.-Shielding: twisted mesh of tinned copper 95%.-Exterior dimater: 0.19" (4.90 mm).Connector A.Type NConnector B.Type TNC
  • 11.81 in Jumper Manufactured with RG-58U-SYS Cable, "N Male" Connectors

    11.81 in Jumper Manufactured with RG-58U-SYS Cable, "N Male" Connectors

    EPCOM INDUSTRIAL · SN-58U-N-30

    Manufactured jumper with the following components:
    Cable:
    • Length: 11.81" (30 cm)
    • Impedance: 50 Ohms
    • Speed factor: 66%
    • Attenuation in 30 m UHF 450 MHz: 9.84 dB
    • Internal AWG caliber conductor: 20 (.37) solid copper
    • Isolation: Solid polyethylene
    • Plating: 95% Tinned copper braided mesh
    • Exterior diameter: 0.19" (4.90 mm)
    Connector A and B:
    • Connector type: N Male
    • Enssambly mode: Folding ring
    • Bronze body: Nickel
    • Central contact: Gold
    • Dielectric isolation: Teflon
  • 3.6 ft Jumper Manufactured with RG-58U-SYS Cable, "N" Connectors

    3.6 ft Jumper Manufactured with RG-58U-SYS Cable, "N" Connectors

    EPCOM INDUSTRIAL · SN-58U-N-110

    Cable.
    Lenght: 1.96 ft / 60 cm.
    Impedance: 50 Ohms.
    Velocity factor: 66%.
    Attenuation at 30 m. UHF 450 MHz: 9.84 dB.
    Inner Conductor AWG: 20 (.37) solid copper
    Insulation: Solid Polyethylene.
    Shielding: 95% tinned copper braided mesh.
    Outside Diameter: 4.90 mm.
    Connector A.
    Connector Type: N Male.
    Assembly: Folding Ring.
    Bronze: Nickel Plated
    Central Contact: Gold.
    Dielectric Insulator: Teflon.
    Connector B.
    Connector Type: SMA Male.
    For Cable: RG-58 / U.
  • 11.81" (30 cm) Jumper Manufactured with RG-58U-SYS Cable with BNC / UHF Connectors

    11.81" (30 cm) Jumper Manufactured with RG-58U-SYS Cable with BNC / UHF Connectors

    EPCOM INDUSTRIAL · SBNC-58U-UHF-30

    Manufactured jumper with the following components:
    Cable:
    • Length: 11.81" (30 cm)
    • Impedance: 50 Ohms
    • Speed factor: 66%
    • Attenuation in 30 m UHF 450 MHz: 9.84 dB
    • Internal AWG caliber conductor: 20 (.37) solid copper
    • Isolation: Solid polyethylene
    • Plating: 95% Tinned copper braided mesh
    • Exterior diameter: 0.19" (4.90 mm)
    Connector A
    -Type BNC
    Connector B
    -Type UHF
  • 23.62" Jumper Manufactured with RG-58U-SYS Cable with N / UHF Connectors

    23.62" Jumper Manufactured with RG-58U-SYS Cable with N / UHF Connectors

    EPCOM INDUSTRIAL · SN-58U-UHF-60

    Manufactured jumper with the following components:
    Cable:
    • Length: 23.62" (60 cm)
    • Impedance: 50 Ohms
    • Speed factor: 66%
    • Attenuation in 30 m UHF 450 MHz: 9.84 dB
    • Internal AWG caliber conductor: 20 (.37) solid copper
    • Isolation: Solid polyethylene
    • Plating: 95% Tinned copper braided mesh
    • Exterior diameter: 0.19" (4.90 mm)
    Connector A
    -Type N
    Connector B
    -Type UHF
  • 1000 Ft. Spool, Flexible Low Loss Communications Coax 50 Ohms 1/2"

    1000 Ft. Spool, Flexible Low Loss Communications Coax 50 Ohms 1/2"

    Times Microwave · LMR-600/1000

    Flexible low loss communications cable ideal for jumper assemblies in wireless communications systems, short antenna feeders run and any application requiring an easily routed, low loss RF cable.
    Application: Outdoor.
    Inner Conductor: Solid BCCAI 4.47 mm.
    Dielectric: Foam Polyethylene 11.56 mm.
    Outer Conductor: Aluminum Tape 11.71 mm.
    Overall Braid: Tinned Cooper.
    Jacket: PE 14.99 mm.
    Attenuation at 150 MHz: 3.2 dB/100 m.
    Attenuation at 450 MHz: 5.6 dB/100 m.
    Impedance: 50 Ohm.
    Propagation Velocity: 87%
    Avg. Power KW: 1.35 at 450 MHz.
    Operating Temperature Range: -40 ~ 85 ºC
    Weight: 0.20 kg/m
  • 3 feet LMR-240UF cable (Ultra Flex) with N Male and SMA Male connectors.�??

    3 feet LMR-240UF cable (Ultra Flex) with N Male and SMA Male connectors.�??

    EPCOM INDUSTRIAL · SN-240UF-SMA-91

    3 ft. LMR-240UF (Ultra Flex) cable with N Male and SMA Male connectors.​​
    Cable Type: LMR-240UF (Ultra Flexible).
    Lenght: 3 feet (91 cm).
    Connector A: N Male (Crimp).
    Connector B: SMA Male (Crimp).
  • 1.96 ft LMR-240UF Cable (Ultra Flex) with N Female / SMA Male Connectors

    1.96 ft LMR-240UF Cable (Ultra Flex) with N Female / SMA Male Connectors

    EPCOM INDUSTRIAL · SNH-240UF-SMA-60

    1.96 feet LMR-240UF (Ultra Flex) cable with N Female and SMA Male connectors.​​
    Cable Type: LMR-240UF (Ultra Flexible)
    Lenght: 1.96 ft (60 cm).
    Connector A: N Female (Crimp).
    Connector B: SMA Male (Crimp).
  • 1.96 ft LMR-240UF Cable (Ultra Flex) with N Female / RP SMA Male Connectors

    1.96 ft LMR-240UF Cable (Ultra Flex) with N Female / RP SMA Male Connectors

    EPCOM INDUSTRIAL · SNH-240UF-SMAI-60

    1.96 feet LMR-240UF (Ultra Flex) cable with N Female and SMA Male connectors.​​
    Cable Type: LMR-240UF (Ultra Flexible)
    Lenght: 1.96 ft (60 cm).
    Connector A: N Female (Crimp).
    Connector B: SMA Male (Crimp).

  • Coaxial Cable RG-8/U Type, 10 AWG Solid 0.108"; Bare Copper Conductor + Tinned Copper Braid Shield (90% Coverage),…

    BELDEN · 9913FT

    Impedance: 50 Ohm. Overall Nominal Diameter: 10.29 mm Nom. Velocity of Propagation: 84% Conductor Diameter: AWG 10. Conductor Material: Bare Copper. Nom. Attenuation in 30 m at 400 MHz: 2.7 dB Nom. Attenuation in 30 m at 700 MHz: 3.7 dB  Outer Shield Material: 90% Tinned Copper Braid + 100% Bonded DouFoil Aluminum.  Insulation Material: Semi-solid Polyethylene. Minimun Bend Radius (Install): 152.4 mm Bulk Cable Weight : 0.209 Kg / 304m. Maximun Operating Frequency: 8.5 GHz.
    Power Rating: 619 W at 400 MHz.
    Operating Temperature Range: -40 ºC to +80 ºC
  • Coaxial Cable RG-58A/U Type, Polyethylene Insulation, Tinned Copper Braid Shield (95% coverage), PVC Jacket

    Coaxial Cable RG-58A/U Type, Polyethylene Insulation, Tinned Copper Braid Shield (95% coverage), PVC Jacket

    BELDEN · 8240FT

    Type RG-58A / U, 20 AWG solid .033 "bare copper conductor, polyethylene insulation, tinned copper braid shield (95% coverage), PVC jacket.
    Impedance: 52 Ohms.
    External Diameter: 4.90 mm.
    Speed Factor: 66%.
    Attenuation in 30 mts. UHF 450 MHz: 8.4 dB.
    Internal Conductor AWG Gauge: 20 Solid copper.
    Insulation: Polyethylene.
    UL flame test: VW-1
    Inductance: 0.26248  (pF/m)
    Indoor applications
    Shielding: Copper braided mesh 95%.
    Weight per meter. 0.052.
    * Price per meter.
  • Heliax Low Density Foam Coaxial Cable, Corrugated Copper, Black PE Jacket

    Heliax Low Density Foam Coaxial Cable, Corrugated Copper, Black PE Jacket

    ANDREW / COMMSCOPE · LDF450AFT

    Electrical Specifications:
    • Impedance cable: 50 Ω ± 1 Ω
    • Capacity: 32.1 pF/ft | 75.8 pF/m
    • DC Resistance, Inner Conductor 2.376 Ω/mi | 2.382 Ω/mi
    • DC Resistance. External Conductor 4.33 Ohms/mi | 4.328 Ohms/mi
    • DC test voltage: 4000 V
    • Inductance: 0.190 μH/m | 0.058 μH/ft
    • Insulation resistance: 160,900 MΩ/mi
    • Jacket spark test voltage (rms): 8000 V
    • Operating frequency band: 1 - 8800 mHz
    • Peak power: 40.0 kW
    • Velocity: 88%
  • 1 Ft, Flexible Low Loss Communications Coax 50 Ohms

    1 Ft, Flexible Low Loss Communications Coax 50 Ohms

    Times Microwave · LMR-400-FT

    Flexible low loss communications cable ideal for jumper assemblies in wireless communications systems, short antenna feeders run and any application requiring an easily routed, low loss RF cable.
    Application: Outdoor.
    Inner Conductor: Solid BCCAI 2.74 mm.
    Dielectric: Foam Polyethylene 7.24 mm.
    Outer Conductor: Aluminum Tape 7.39 mm.
    Overall Braid: Tinned Cooper.
    Jacket: PE 10.29 mm.
    Attenuation at 150 MHz: 5 dB/100 m.
    Attenuation at 450 MHz: 8.9 dB/100 m.
    Impedance: 50 Ohm.
    Velocity of Propagation: 85%
    Weight: 0.10 kg/m.
    Avg. Power KW: 0.83 at 450 MHz.
    Operating Temperature Range: -40 ºF to + 85 ºC
  • N2KEXT-6RD - 1.8m nmea 2000 cable for connection to additional equipment or as a red cable extension

    N2KEXT-6RD - 1.8m nmea 2000 cable for connection to additional equipment or as a red cable extension

    SIMRAD · 000-0127-53

    N2KEXT-6RD - 1.8m nmea 2000® cable for connection to additional equipment or as a red cable extension.
  • FSJ4-50B, HELIAX® Superflexible Foam Coaxial Cable, corrugated copper, 1/2 in, black PE jacket (Halogen free jacketing…

    FSJ4-50B, HELIAX® Superflexible Foam Coaxial Cable, corrugated copper, 1/2 in, black PE jacket (Halogen free jacketing…

    ANDREW · FSJ4-50BFT

    Electrical Specifications   Cable Impedance   50 ohm ±1 ohm Capacitance   25.2 pF/ft   |   82.7 pF/m dc Resistance, Inner Conductor   0.820 ohms/kft   |   2.690 ohms/km dc Resistance, Outer Conductor   1.560 ohms/kft   |   5.120 ohms/km dc Test Voltage   2500 V Inductance   0.207 µH/m   |   0.063 µH/ft Insulation Resistance   100000 Mohms•km Jacket Spark Test Voltage (rms)   5000 V Operating Frequency Band   1 – 10200 MHz Peak Power   22.5 kW Velocity   81%
  • Stripper Cutters for 22-10 and 30-20 AWG cables

    Stripper Cutters for 22-10 and 30-20 AWG cables

    TEMPO · PA70058

    Specifications
    Precision-ground stripping cavities for 22-10 and 30-20 AWG wire prevent scoring
    Also strips internal wires of ROMEX non-metallic building electrical wire. ROMEX is a federally registered trademark owned by Southwire Company
    Gripping jaws on front of tool
    Screw cutter and wire loops made into the frame
    Spring-loaded closure
    Built-in safety lock
    Includes:
    1 PA70056
    1 PA70057
  • Stripper CST PRO with black Blade Cassette

    Stripper CST PRO with black Blade Cassette

    TEMPO · PA1282

    Features
    Works with a wide range of cable diameters from .1 IN -.315 IN (2.5-8.0mm) including: RG58/59/62AU, RG6/6QS, RG174, Belden 1505A, 1855A & 8281 and mini-coax
    Pre-set for standard 2- and 3-level strip lengths
    Coax stripper designed for pros requiring precision, versatility & ease of use
    Reversible-rollers easily adjust for various cable sizes including mini-coax
    Dual roller mechanism perfectly centers cable & applies equal pressure to eliminate cable distortion
    Quick-change pre-set blade cassettes
    Cam adjustment ensures precise hold on cable
    Fixed blade cassettes pre-set for standard 2- and 3-level strip lengths
    Interchangeable blades reduce set-up time
    Lifetime warranty on frame only
    Patented – Patent # 6526661
  • Pro-Grip Cutter for UTP and Coaxial cable

    Pro-Grip Cutter for UTP and Coaxial cable

    TEMPO · PA1175

    Specifications
    Cuts solid or stranded cable up to AWG 6
    Precise and effortless cuts
    Round cutting form won’t deform cables
    Ideal for UTP and Coax, RG58, RG59 and RG6/6Q; RG7 and RG11
  • Needle Nose Pliers with knurled surface for gripping, wrapping and looping

    Needle Nose Pliers with knurled surface for gripping, wrapping and looping

    TEMPO · PA1180

    Specifications
    Side cutter for AWG 19-26 copper
    Non-slip grips for precision control
    Crimp capacity
    UR: AWG 19-26
    UY: AWG 22-26
    UG: AWG 19-26
    Stripping cavity for AWG 22 wire
    Needle-nose with knurled surface for gripping, wrapping and looping
  • 1000 Ft. Spool, Flexible Low Loss Communications Coax 50 Ohms 1/2"

    1000 Ft. Spool, Flexible Low Loss Communications Coax 50 Ohms 1/2"

    Times Microwave · LMR600UF/1000

    Flexible low loss communications cable ideal for jumper assemblies in wireless communications systems, short antenna feeders run and any application requiring an easily routed, low loss RF cable.
    Application: Outdoor.
    Inner Conductor: Solid BCCAI 4.47 mm.
    Dielectric: Foam Polyethylene 11.56 mm.
    Outer Conductor: Aluminum Tape 11.71 mm.
    Overall Braid: Tinned Cooper.
    Jacket: PE 14.99 mm.
    Attenuation at 150 MHz: 3.2 dB/100 m.
    Attenuation at 450 MHz: 5.6 dB/100 m.
    Impedance: 50 Ohm.
    Propagation Velocity: 87%
    Avg. Power KW: 1.35 at 450 MHz.
    Operating Temperature Range: -40 ~ 85 ºC
    Weight: 0.20 kg/m
  • Stripper Cutter for 22-10 AWG cables

    Stripper Cutter for 22-10 AWG cables

    TEMPO · PA70056

    Specifications
    Precision-ground stripping cavities for 22-10 AWG wire prevent scoring
    Also strips internal wires of ROMEX non-metallic building electrical wire. ROMEX is a federally registered trademark owned by Southwire Company
    Gripping jaws on front of tool
    Screw cutter and wire loops made into the frame
    Spring-loaded closure
    Built-in safety lock
  • Stripper Cutter for 30-20 AWG cables

    Stripper Cutter for 30-20 AWG cables

    TEMPO · PA70057

    Specifications
    Precision-ground stripping cavities for 30 - 20 AWG wire prevent scoring
    Also strips internal wires of ROMEX non-metallic building electrical wire. ROMEX is a federally registered trademark owned by Southwire Company
    Gripping jaws on front of tool
    Screw cutter and wire loops made into the frame
    Spring-loaded closure
    Built-in safety lock
  • Cable coaxial HELIAX de 7/8". Cobre corrugado, 100% Blindado.

    Cable coaxial HELIAX de 7/8". Cobre corrugado, 100% Blindado.

    COMMSCOPE (ANDREW) · AVA550

    Electrical Specifications
    Cable Impedance 50 ohm ±1 ohm
    Capacitance 22.0 pF/ft | 73.0 pF/m
    DC Resistance, Inner Conductor 2.16 Ohms/mi | 2.31 Ohms/mi
    DC Resistance, Outer Conductor 1.80 Ohms/mi | 1.80 Ohms/mi
    DC Test Voltage 6000 V
    Inductance 0.184 μH/m | 0.056 μH/ft
    Insulation Resistance 100000 M ohms
    Jacket Spark Test Voltage (rms) 8000 V
    Operating Frequency Band 1 – 5000 MHz
    Peak Power 91.0 kW
    Velocity 91%
    *PRICE PER FT*

  • LDF4-50A Jumper with Interface Types 7-16 DIN Male 2 meters

    COMMSCOPE (ANDREW) · L4ADMDM2MP

    Specifications Product Classification Product Type SureFlex® Premium, static PIM Product Series LDF4-50A General Specifications Body Style, Connector A Straight Body Style, Connector B Straight Interface, Connector A 7-16 DIN Male Interface, Connector B 7-16 DIN Male Specification Sheet Revision Level B Dimensions Length 2 m | 6.562 ft Nominal Size 1/2 in Electrical Specifications 3rd Order IMD Static -116 dBm 3rd Order IMD Static Test Method Two +43 dBm carriers DTF, Connector A -34 dB DTF, Connector B -34 dB Return Loss/VSWR Frequency Band VSWR Return Loss (dB) 698–960 MHz 1.06 30.72 1700–2200 MHz 1.06 30.72 2200–2700 MHz 1.11 26.00
  • 1000 Ft. Spool, Flexible Low Loss Communications Coax 75 Ohms 1/2"

    1000 Ft. Spool, Flexible Low Loss Communications Coax 75 Ohms 1/2"

    Times Microwave · LMR60075/1000

    Flexible low loss communications cable ideal:
    Satellite Applications
    Video Applications CCTV, CATV, baseband or broadband.
    In-building Feeder Runs.
    Any 75 Ohm Wireless Applications requiring an easily routed.
    Application: Outdoor.
    Inner Conductor: Solid BCCAI 4.47 mm.
    Dielectric: Foam Polyethylene 11.56 mm.
    Outer Conductor: Aluminum Tape 11.71 mm.
    Overall Braid: Tinned Cooper.
    Jacket: PE 14.99 mm.
    Attenuation at 150 MHz: 3.2 dB/100 m.
    Attenuation at 450 MHz: 5.6 dB/100 m.
    Impedance: 50 Ohm.
    Propagation Velocity: 87%
    Avg. Power KW: 1.35 at 450 MHz.
    Operating Temperature Range: -40 ~ 85 ºC
    Weight: 0.20 kg/m

  • LMR-240 Cable of 100 cms. with, BNC Male to N Male Connectors.

    EPCOM INDUSTRIAL · SBNC-240-N-100

    LMR-240 Cable, BNC Male to N Male Connectors.
    Length: 39.37" (100 cm).
    Connector A: BNC Male.
    Connector B: N Male.
    Any cable, any length, any connector, any quantity.
    The best machines... The best connectors!
  • Stand Off Adapter With 3/8" Tapped Holes 10 pieces KIT

    Stand Off Adapter With 3/8" Tapped Holes 10 pieces KIT

    SYSCOM TOWERS · SOA38

    Stand Off Adapter With 3/8" Tapped Holes 10 pieces KIT
  • Coaxial Cable 1000 ft Reel 50 Ohms with Solid-copper Conductor and Tinned Copper Mesh

    Coaxial Cable 1000 ft Reel 50 Ohms with Solid-copper Conductor and Tinned Copper Mesh

    LINKEDPRO BY EPCOM · LP-195/1000

    The Linkedpro by epcom® line of coaxial cables is the ideal solution to generate reliable and long-lasting installations; Designed for outdoor use as it has a UV-resistant cover.
    Main Features
    Easier to install.
    Better performance.
    Better shielding.
    ULTRA low loss.
    High performance.
    Long lifespan.
    Applications
    Jumper manufacturing.
    Communication systems via radio.
  • Coaxial Cable 1000 ft Reel LINKEDPRO Low Loss RG-8/X, 50 Ohms

    Coaxial Cable 1000 ft Reel LINKEDPRO Low Loss RG-8/X, 50 Ohms

    LINKEDPRO BY EPCOM · LP-240/1000

    The Linkedpro by epcom® line of coaxial cables is the ideal solution to generate reliable and long-lasting installations; Designed for outdoor use as it has a UV-resistant cover.
    Main Features
    Easier to install.
    Better performance.
    Better shielding.
    ULTRA low loss.
    High performance.
    Long lifespan.
    Applications
    Jumper manufacturing.
    Communication systems via radio.
  • Coaxial Cable 1000 ft Reel LINKEDPRO 50 Ohms with Solid-Copper Conductor and Tinned Copper Mesh

    Coaxial Cable 1000 ft Reel LINKEDPRO 50 Ohms with Solid-Copper Conductor and Tinned Copper Mesh

    LINKEDPRO BY EPCOM · LP-600/1000

    The Linkedpro by epcom® line of coaxial cables is the ideal solution to generate reliable and long-lasting installations; Designed for outdoor use as it has a UV-resistant cover.
    Main Features
    Easier to install.
    Better performance.
    Better shielding.
    ULTRA low loss.
    High performance.
    Long lifespan.
    Applications
    Jumper manufacturing.
    Communication systems via radio.
  • LINKEDPRO Coaxial Cable 1000 ft Reel RG-8 50 Ohms with Copper Clad Aluminum Conductor and Tinned Copper Coated Aluminum…

    LINKEDPRO Coaxial Cable 1000 ft Reel RG-8 50 Ohms with Copper Clad Aluminum Conductor and Tinned Copper Coated Aluminum…

    LINKEDPRO BY EPCOM · LP-400/1000

    The Linkedpro by epcom® line of coaxial cables is the ideal solution to generate reliable and long-lasting installations; Designed for outdoor use as it has a UV-resistant cover.
    Main Features
    Easier to install.
    Better performance.
    Better shielding.
    ULTRA low loss.
    High performance.
    Long lifespan.
    Applications
    Jumper manufacturing.
    Communication systems via radio.
    <img…
  • 1000 ft Reel Coaxial Cable Type RG-142, Double Shield, 50 Ohms Solid Copper Conductor and Tinned Copper Mesh

    1000 ft Reel Coaxial Cable Type RG-142, Double Shield, 50 Ohms Solid Copper Conductor and Tinned Copper Mesh

    LINKEDPRO BY EPCOM · LP-142/1000

    The Linkedpro by epcom® line of coaxial cables is the ideal solution to generate reliable and long-lasting installations; Designed for outdoor use as it has a UV-resistant cover.
    Main Features
    Easier to install.
    Better performance.
    Better shielding.
    ULTRA low loss.
    High performance.
    Long lifespan.
    Applications
    Jumper manufacturing.
    Communication systems via radio.
  • 1/2-in Corrugated Coaxial Cable 1000 ft Reel

    1/2-in Corrugated Coaxial Cable 1000 ft Reel

    LINKEDPRO BY EPCOM · LP-450A/1000

    The coaxial cable line from Linkedpro by epcom® is the ideal solution for creating reliable and long-lasting installations. It is designed for outdoor use, as it features a UV-resistant cover.
    Main Features:
    Greater ease of installation.
    Improved performance.
    Enhanced shielding.
    ULTRA low loss.
    High efficiency.
    Long lifespan.
    Technical specs:
    Propagation speed: 87%
    Impedance: 50± 2Ω
    Capacitance: 76pF/m
    Physical specs:
    Central conductor: Copper tube 9.00±10mm
    Dielectric insulation: Polyethylene foam PE 22.2± 0.20mm
    External conductor: Corrugated copper 24.9mm± 0.30mm
    Jacket: LDPE / black 27.30±0.30mm
  • Cable coaxial 90% de blindaje, certificación RoHS, conductor de cobre revestido de Aluminum, 50 Ohms

    Cable coaxial 90% de blindaje, certificación RoHS, conductor de cobre revestido de Aluminum, 50 Ohms

    COMMSCOPE (ANDREW) · CNT400FT

    CommScope's CNT-400 is a high-performance coaxial cable designed for applications requiring a perfect balance between flexibility, low loss, and high durability. Ideal for a wide range of RF communication uses, the CNT-400 offers advanced technical characteristics that make it the best choice on the market. With quality certifications and compliance with international standards, this cable is synonymous with reliability and efficiency.
    Sold by the meter
    Specifications
    Product Classification
    Product Type: Braided coaxial cable
    Brand: CNT®
    Series: CNT-400
    General Specifications
    Braid Coverage: 90%
    Jacket Color: Black
    Dimensions
    Dielectric Diameter: 7.24 mm | 0.285 in
    Jacket Diameter: 10.29 mm | 0.405 in
    Diameter Over Tape: 7.391 mm | 0.291 in
    Inner Conductor Diameter: 2.74 mm | 0.108 in
    Outer Conductor Diameter: 8.08 mm | 0.318 in
    Nominal Size: 0.400 in
    Electrical Specifications
    Impedance: 50 ohm
    Capacitance: 78 pF/m | 23.774 pF/ft
    DC Resistance Inner Conductor: 4.69 ohms/km | 1.43 ohms/kft
    DC Resistance Outer Conductor: 5.61 ohms/km | 1.71 ohms/kft
    DC Test Voltage: 2500 V
    Jacket Test Voltage (rms): 4000 V
    Maximum Frequency: 16.2 GHz
    Operating Frequency Band: 30 – 6000 MHz
    Peak Power: 16 kW
    Shielding Effectiveness: 90 dB
    Velocity: 85%
    Materials
    Braid Material: Tinned copper
    Dielectric Material: Foamed polyethylene
    Jacket Material: Halogen-free polyethylene
    Inner Conductor Material: Aluminum-clad copper wire
    Shield Tape Material: Aluminum
    Mechanical Specifications
    Minimum Bend Radius: 25.4 mm | 1 in
    Tensile Strength: 73 kg | 160.937 lb
    Bending Moment: 0.7 N-m | 6.196 in-lb
    Plate Crush Resistance: 0.7 kg/mm | 39.198 lb/in
    Environmental Specifications
    Installation Temperature: -40 °C to +85 °C (-40 °F to +185 °F)
    Operating Temperature: -40 °C to +85 °C (-40 °F to +185 °F)
    Storage Temperature: -70 °C to +85 °C (-94 °F to +185 °F)
    Packaging and Weights
    Cable Weight: 0.1 kg/m | 0.067 lb/ft
    Regulatory Compliance / Certifications
    CHINA-ROHS: Below the maximum concentration value
    ISO 9001: 2015: Designed, manufactured and/or distributed under this quality management system
    REACH-SVHC: Compliant with the SVHC review found at https://www.commscope.com/ProductCompliance
    ROHS: Compliant
    UK-ROHS: Compliant
  • 1000ft Drum of 7/8" Corrugated Coaxial Cable.

    1000ft Drum of 7/8" Corrugated Coaxial Cable.

    LinkedPRO · LP550A/1000

    The coaxial cable line from Linkedpro by epcom® is the ideal solution for creating reliable and long-lasting installations. It is designed for outdoor use, as it features a UV-resistant cover.
    Main Features:
    Greater ease of installation.
    Improved performance.
    Enhanced shielding.
    ULTRA low loss.
    High efficiency.
    Long lifespan.
    Technical specs:
    Propagation speed: 87%
    Impedance: 50± 2Ω
    Capacitance: 76pF/m
    Physical specs:
    Central conductor: Copper tube 9.00±10mm
    Dielectric insulation: Foam PE 22.2± 0.20mm
    External conductor: Corrugated copper 24.9mm± 0.30mm
    Jacket: Black PE 27.30±0.30mm
  • Coaxial cable with 90% shielding, RoHS certification, aluminum-coated copper conductor, 50 Ohms, 1640 ft reel.

    Coaxial cable with 90% shielding, RoHS certification, aluminum-coated copper conductor, 50 Ohms, 1640 ft reel.

    COMMSCOPE (ANDREW) · CNT400/1640

    CNT-400 Coaxial Cable
    High Efficiency and Superior Performance Introduction
    The CNT-400 from CommScope is a high-performance coaxial cable designed for applications that require the perfect balance between flexibility, low loss, and high durability. Ideal for a wide range of RF communication uses, the CNT-400 offers advanced technical characteristics that make it the best option on the market. With international certifications, this cable is synonymous with reliability and efficiency.
    ★ 1640 ft ★ Specifications Product Classification
    Product Type: Braided coaxial cable
    Brand: CNT®
    Series: CNT-400
    General Specifications
    Braid Coverage: 90%
    Jacket Color: Black
    Dimensions
    Dielectric Diameter: 7.24 mm | 0.285 in
    Jacket Diameter: 10.29 mm | 0.405 in
    Tape Diameter: 7.391 mm | 0.291 in
    Inner Conductor Diameter: 2.74 mm | 0.108 in
    Outer Conductor Diameter: 8.08 mm | 0.318 in
    Nominal Size: 0.400 in
    Electrical Specifications
    Impedance: 50 ohms
    Capacitance: 78 pF/m | 23.774 pF/ft
    DC Resistance (Inner Conductor): 4.69 ohms/km | 1.43 ohms/kft
    DC Resistance (Outer Conductor): 5.61 ohms/km | 1.71 ohms/kft
    DC Test Voltage: 2500 V
    Jacket Test Voltage (rms): 4000 V
    Maximum Frequency: 16.2 GHz
    Operating Frequency Band: 30 – 6000 MHz
    Peak Power: 16 kW
    Shielding Effectiveness: 90 dB
    Velocity: 85%
    Materials
    Braid Material: Tinned copper
    Dielectric Material: Foamed polyethylene
    Jacket Material: Non-halogenated polyethylene
    Inner Conductor Material: Aluminum-clad copper wire
    Shield Tape Material: Aluminum
    Mechanical Specifications
    Minimum Bend Radius: 25.4 mm | 1 in
    Tensile Strength: 73 kg | 160.937 lb
    Bending Moment: 0.7 N·m | 6.196 in·lb
    Flat Plate Crush Resistance: 0.7 kg/mm | 39.198 lb/in
    Environmental Specifications
    Installation Temperature: -40 °C to +85 °C (-40 °F to +185 °F)
    Operating Temperature: -40 °C to +85 °C (-40 °F to +185 °F)
    Storage Temperature: -70 °C to +85 °C (-94 °F to +185 °F)
  • 7/8" Heliax Coaxial Cable., Price per Foot

    7/8" Heliax Coaxial Cable., Price per Foot

    LinkedPRO · LP550AFT

    The coaxial cable line from Linkedpro by epcom® is the ideal solution for creating reliable and long-lasting installations. It is designed for outdoor use, as it features a UV-resistant cover.
    Main Features:
    Greater ease of installation.
    Improved performance.
    Enhanced shielding.
    ULTRA low loss.
    High efficiency.
    Long lifespan.
    Technical specs:
    Propagation speed: 87%
    Impedance: 50± 2Ω
    Capacitance: 76pF/m
    Physical specs:
    Central conductor: Copper tube 9.00±10mm
    Dielectric insulation: Foam PE 22.2± 0.20mm
    External conductor: Corrugated copper 24.9mm± 0.30mm
    Jacket: Black PE 27.30±0.30mm

No products match your search, but we can still try to source it. Use the button below.

Don't see what you need?

We carry far more than we can list, and we can often source hard-to-find radios, RF gear and parts on request. Tell us what you're after and we'll try to source it and send you a quote.

Message us and we'll try to source it & send you a quote →
Quote0